Metsorb® HMRG

Metsorb® HMRG

Metsorb® HMRG

Product catalog summary
Overview: MetSorb HMRG and HMRP adsorbents are designed to effectively remove arsenic and a variety of other contaminants from water. These adsorbents utilize a patented material that offers high removal efficiencies with minimal empty bed contact times, as low as 10 seconds. Compared to iron and alumina-based products, MetSorb provides higher capacity and reduced ion interference.
Specifications:
  • Adsorptive capacity: 220 grams of arsenic per kilogram of HMRG at pH 7.
  • Capacity: 40,000 bed volumes at 40 ppb arsenic inlet concentration, 1.6 minutes EBCT, and 10 ppb breakthrough.
  • Appearance: White beads with a moisture content of less than 10% and a bulk density of 0.65 grams per cc.
  • Particle size: –16/+60 U.S. mesh, with other sizes available.
Features and Benefits:
  • Effective removal of heavy metals to meet drinking water standards.
  • High adsorbent capacity, reducing the frequency of replacement.
  • Fast kinetics suitable for high flow rates.
  • Nonhazardous disposal as solid waste.
Contaminants Removed: Arsenic III, Arsenic V, Cadmium, Copper, Lead, Mercury, Zinc, Antimony, Selenium, Uranium.
Applications: Suitable for commercial and industrial water treatment units, municipal water treatment, carbon blocks, cartridges for pitchers, faucet-mounted and countertop devices, and household point-of-entry treatment units.
Performance Data:
  • Small column tests show superior performance of HMRG compared to iron-based adsorbents.
  • Batch test data indicate significant reduction in metal concentrations, e.g., Arsenic V from 50 ppb to 19-21 ppm.
  • Arsenic treatment capacity varies with tank size and inlet levels.
  • Lead removal data demonstrate effective reduction at 30 seconds EBCT.
  • Adsorption isotherms for lead and arsenic show consistent performance across different pH levels.
Testing and Standards: The product has been tested under NSF Standard 53 for arsenic removal, with results indicating effective performance at pH levels of 6.5 and 8.5.
Contact Information: For more information, contact MetSorb HMRG Customer Service at 1-302-731-3523 or visit www.gravertech.com.
See more

Catalog excerpts

Metsorb® HMRG-1

Graver Technologies MetSorb HMRG Effective, Low-Cost Adsorbent for Removal of Heavy Metals MetSorb HMRG and HMRP adsorbents utilize a patented material to adsorb both forms of arsenic as well as a wide range of contaminants in water. Empty bed contact times as low as 10 seconds achieve high removal efficiencies. The material affords a higher capacity and a lower level of ion interference than competitive iron and alumina based products. MetSorb HMRG media's adsorptive capacity is 220 grams of arsenic per kilogram of HMRG adsorbent at a pH of 7. It yields 40,000 bed volumes of capacity at an inlet concentration of 40 parts per billion (ppb) of arsenic, at 1 .6 minutes of empty bed contact time EBCT, and a Adsorbent Product Features/Benefits • Removal of heavy metals to meet drinking water • High adsorbent capacity requiring less frequent • Fast kinetics to work effectively at high flow rates • Nonhazardous disposal as solid waste • Cadmium • Uranium • Copper • Zinc • Antimony • Selenium • Commercial and industrial treatment units for drinking water or contaminated water • Municipal water treatment • Carbon blocks • Faucet mounted and countertop devices • Household point of entry treatment units MetSorb HMRG Adsorbent Specifications HMRG Granular White beads Moisture Content iulk Density Free Flowing -I6/+60 U.S. mesh (other sizes available) SMALL COLUMN TEST RESULTS Comparison of HMRG adsorbent with iron-based adsorbent.

 Open the catalog to page 1
Metsorb® HMRG-2

BATCH TEST DATA-ADSORPTIVE CAPACITY MetSorb HMRG ARSENIC TREATMENT CAPACITY VS. ARSENIC INLET LEVELS Initial Concentration Final Concentration ARSENIC REMOVAL DATA - NSF 53 Testing was done under the conditions specified by the NSF Standard 53 (or Arsenic. Results at a pH of 6.5 and a pH of 8.5 are shown in the graph above. LEAD ADSORPTION ISOTHERM Lead Concentration in Parts Per Billion Adsorption isotherms for lead between pH 5 and 7 are nearly Treatment capacity as a function of tank size. LEAD REMOVAL COLUMN DATA Effluent Lead Concentration I Influent Lead Concentration I Effluent Lead Concentration...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.