![Graver Technologies - logo](https://img.directindustry.com/images_di/logo-p/L55047.gif)
Catalog excerpts
![Air - Gas Filter/Separators - 1](https://img.directindustry.com/pdf/repository_di/55047/air-gas-filter-separators-342959_1m.jpg)
INDUSTRIAL FILTRATION PRODUCTS CONSLER AGS SERIES AIR & GAS FILTER SEPARATORS Against the filter media and are extracted from the gas stream. The larger droplets once formed, drain off the outside of the element and fall by gravity to the sump area in the filter housing where a drain connection is provided for removing the coalesced liquid. The high efficiency element prevents reentrainment of the liquid downstream. The coalescing action continues at the same rate that new liquid enters the element, allowing long service life before element replacement is required. The cartridge is designed with an inside diameter that is approximately the same dimension as the inlet and outlet. This unique design allows for a smooth transition of the flow through the housings and elements. The net result is a low pressure drop. Features • ASME Code design and constructed • High flow rate capability • Low pressure drop & long element life • High temperature capability • Economical replaceable cartridges • Modified and custom designs available • Design pressures from 180 psi to 1440 psi • Contact Factory for higher pressure applications Applications • Effective separation of oil, water and other liquid Aerosols from compressed air and gas lines. • High efficiency removal of: - Dispersed liquids, .3m & up, 99% minimum efficiency. - Solid particles, .3m & up, 99% minimum efficiency. • Use as a pre-filter to an air dryer, increasing system efficiency and equipment service life. • Gas pipeline applications; to protect equipment from liquid and solid contaminants. • Ideal for satisfying OEM specifications. Element Design & Construction The AGS Series of coalescing filters offers the use of a unique high efficiency media. The element is constructed of multiple layer pleated fiberglass which is supported on a carbon steel core. The elements are available with stainless steel internals for more corrosive applications. The drainage of coalesced liquids and protection from re-entrainment is provided by a polyester foam outer wrap. The pleated design fiberglass element has extended surface area that leads to high dirt loading and log efficient service life. The coalescing action is a gathering of minute liquid particles or smaller droplets to form larger droplets. The small droplets that enter the inside of the element are intercepted or impinged Element Materials The pleated radial fin fiberglass element offers excellent chemical compatibility. The end caps are plated carbons steel with an 0-ring seal. The standard cartridge can be used in service up to 200 0F. Optional materials permit temperatures to 400 0 F. Housing Design and Construction Housings are designed and constructed in accordance with ASME Section VIII, Division I requirements for unfired pressure vessels. Models AGS-115 and larger are furnished with 1/4” NPT gauge connections on the inlet/outlet nozzles. AGS Models 160 thru 190 are equipped with three support legs. All models have a large sump areas for the collection of liquids. An optional ball valve and auto drain are available for each mode. Housings can be equipped with P gauges, sight glasses, and float switches. Contact the factor for detail. Standard filter housings are of carbon steel construction and my be modified to meet special application needs. The housings are also available in 304 and 316 stainless materials. High pressure designs up to 6000 PSIG are also available. Filter Materials & Ratings • Housings - Carbon Steel AGS 110: 150 PSIG at 100 0F. Max AGS 115 and larger: 180 PSIG at 650 0F. Max • Closure Gasket NEOPRENE*: 300 0F. Max • Standard Elements All Models: 200 0F. Max Fiberglass media; .3m retention at 99% minimum efficiency * DuPont registered trademark
Open the catalog to page 1![Air - Gas Filter/Separators - 2](https://img.directindustry.com/pdf/repository_di/55047/air-gas-filter-separators-342959_2m.jpg)
Page -2 of 6 AGS Series Specifications Up to 180 PSIG Operating Pressure 1 Conn. Model No. Dimensions-Inches Housing Gasket Part No. Part No. Element No. Total filter Req'd. Area Sq. Ft. Approx. Weight Lbs. Size Style A B AGS 110-005 FT 1/2 FPT 3 5/8 7/8 12 3/4 4 5/8 10 3/4 40313 20560 1 1.40 7 AGS 110-007 FT 3/4 FPT 3 5/8 7/8 12 3/4 4 5/8 10 3/4 40313 20560 1 1.40 7 12 3/4 4 5/8 10 3/4 F E D AGS 110-010 FT 1 FPT 3 5/8 7/8 40313 20560 1 1.40 7 AGS 115-015 MT 1 1/2 MPT 5 1/4 3 17 11 10 6003N03 20561 1 3.40 20 AGS 120-020 MT 2 MPT 6 1/4 3 19 12 12 6004N04 20562 1 4.40 30 AGS 130-030 MT 3 MPT...
Open the catalog to page 2![Air - Gas Filter/Separators - 3](https://img.directindustry.com/pdf/repository_di/55047/air-gas-filter-separators-342959_3m.jpg)
Page -3 of 6 AGSH Series Specifications Up to 285 PSIG Operating Pressure 1 Conn. Dimensions-Inches Element No. Total filter Req'd. Area Sq. Ft. Size Style A D E F Housing Gasket Part No. AGSH 110-005 MT 1/2 MPT 4.5 17.5 10 10 6015PSO 20560 1 1.4 60 AGSH 110-007 MT 3/4 MPT 4.5 17.5 10 10 6015PSO 20560 1 1.4 60 AGSH 110-010 MT 1 MPT 4.5 17.5 10 10 6015PSO 20560 1 1.4 60 AGSH 120-015 MT 1 1/2 MPT 6 5/8 25.5 13.5 12 6016PSO 20562 1 4.4 105 AGSH 120-020 FL 2 FLG 6 5/8 25.5 13.5 12 6016PSO 20562 1 4.4 105 AGSH 130-030 FL 3 FLG 8 5/8 33.5 18 12 6017PSO 20563 1 6.4 195 AGSH 140-030 FL 3 FLG 8 5/8...
Open the catalog to page 3![Air - Gas Filter/Separators - 4](https://img.directindustry.com/pdf/repository_di/55047/air-gas-filter-separators-342959_4m.jpg)
Page -4 of 6 AGSHH Series Specifications Up to 740 PSIG Operating Pressure 1 Conn. Dimensions-Inches Element No. Total filter Req'd. Area Sq. Ft. Size Style A D E F Housing Gasket Part No. AGSHH 110-005 MT 1/2 MPT 4.5 17.5 10 10 6034PSO 20560 1 1.4 82 AGSHH 110-007 MT 3/4 MPT 4.5 17.5 10 10 6034PSO 20560 1 1.4 82 AGSHH 110-010 MT 1 MPT 4.5 17.5 10 10 6034PSO 20560 1 1.4 82 AGSHH 120-015 MT 1 1/2 MPT 6 5/8 25.5 13.5 12 6035PSO 20562 1 4.4 150 AGSHH 120-020 FL 2 FLG 6 5/8 25.5 13.5 12 6035PSO 20562 1 4.4 150 AGSHH 130-030 FL 3 FLG 8 5/8 33.5 18 12 6036PSO 20563 1 6.4 295 AGSHH 140-030 FL 3...
Open the catalog to page 4![Air - Gas Filter/Separators - 6](https://img.directindustry.com/pdf/repository_di/55047/air-gas-filter-separators-342959_6m.jpg)
Page -6 of 6 P Correction Factors (Specific Gravity Relative to Air) Gas Chem. Formula Molecular Weight Acetylene C2 H5 26.00 0.897 Air --- 28.96 1.000 Ammonia NH 3 17.03 0.587 A 39.94 1.377 Bromine Br 2 159.83 5.519 Butane C 4 H 10 58.12 2.007 CO 2 44.01 1.520 Chlorine Cl 2 70.91 2.446 Ethane C2 H6 30.07 1.039 Ethylene C2 H4 28.05 0.967 Fluorine F2 38.00 1.312 Helium He 4.00 0.138 Hydrogen H2 2.02 0.069 Methane CH 4 16.04 0.554 Natural Gas --- --- 0.610 Nitrogen N2 28.02 0.967 Oxygen O2 32.00 1.103 Propane C3 H8 44.10 1.523 Propylene C3 H6 42.08 1.453 Sulfur Dioxide So 2 64.07 2.208 Vinyl...
Open the catalog to page 6All Graver Technologies catalogs and technical brochures
-
GLP
2 Pages
-
Citadel
2 Pages
-
Stratum™ C Series
8 Pages
-
Healthcare Brochure
4 Pages
-
Beverage Brochure
6 Pages
-
Products
2 Pages
-
Compressed Gas Filters
8 Pages
-
Exhaust Filters
4 Pages
-
Air Intake Panel Filter
6 Pages
-
Air Intake Filter
4 Pages
-
Coalescing Filters
4 Pages
-
Liquid Filter Housings
7 Pages
-
Low Pressure Gas Filters
4 Pages
-
Oil Mist Coalescers
2 Pages
-
Nitric Acid Filters
4 Pages
-
Ecosorb ® S-406
1 Pages
-
Ecosorb ® C-945
1 Pages
-
Ecosorb ® C-941
1 Pages
-
Ecosorb ® C-908
1 Pages
-
GTX 323-E Brochure
8 Pages
-
Backwashing Membranes
1 Pages
-
Stratum Series Brochure
8 Pages
-
Scepter Product Brochure
8 Pages
-
Vacuum Filters
4 Pages
-
Housing & Elements
2 Pages
-
Air & Gas Filters
2 Pages
-
W-762 MSDS
4 Pages
-
S-406 MSDS
4 Pages
-
C-906 MSDS
4 Pages
-
W-701
1 Pages
-
S-405
1 Pages
-
C-902
1 Pages
-
Metsorb® HMRG
2 Pages
-
Metsorb® HMRP
2 Pages