Catalogs >
G.R.A.S. Sound & Vibration >
G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair
5Pages

Catalog excerpts

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair - 1

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair Date 10-06-2013. Page 1 of 5 G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair Sensitivity: 12,5 mV/Pa Freq resp: 3.15 Hz to 20 kHz Dynamic range: 27 dBA to 146 dB The 40AGI is an IEC 61094-compliant, WS2F ½" prepolarized sound-intensity microphone pair. The 40GI microphone pair consists of two phase-matched free-field condenser microphones with extremely well-controlled phase characteristics for use in sound-intensity probes. Their standard mounting threads make them compatible with all the usual available makes of measurement-microphone preamplifiers. Introduction The 40AGI is an IEC 61094-compliant, WS2F ½" prepolarized sound-intensity microphone pair. Read about the externally polarized equivalent [40AI]. The 40GI microphone pair consists of two phase-matched free-field condenser microphones with extremely well-controlled phase characteristics for use in sound-intensity probes. Their standard mounting threads make them compatible with all the usual available makes of measurement-microphone preamplifiers. As a microphone pair, the free-field frequency response of the 40GI complies with IEC 61043 1993 Class 1

Open the catalog to page 1

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair - 2

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair Date 10-06-2013. Page 2 of 5 and IEC 60651 Type 1 in the range from 20 Hz to 10 kHz. Two 40GI microphones are included in 40GK microphone set, which is used in the G.R.A.S. CCP Sound Intensity Probe Type 50GI. 40GI is individually factory-calibrated and delivered with a calibration chart stating its specific open-circuit sensitivity and pressure frequency response. Typical applications and use The 40GI is designed for sound-intensity and sound-power measurements, as well as sound-source localization, which is why it is included in...

Open the catalog to page 2

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair - 3

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair Date 10-06-2013. Page 3 of 5 The microphone diaphragm, body, and improved protection grid are made of high-grade stainless steel, which makes the microphone resistant to physical damage, as well as corrosion caused by aggressive air or gasses. This, combined with the enforced gold-plated microphone terminal which guarantees a highly reliable connection, enables G.R.A.S. to offer 5 years warranty against defective materials and workmanship. Learn more about G.R.A.S.' unique warranty policies. Service If you accidentally damage the...

Open the catalog to page 3

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair - 4

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair Date 10-06-2013. Page 4 of 5 Microphone cartridge capacity, typical Temperature range, operation Temperature range, storage [dB/°C / dB/°F] Static pressure coefficient @250 Hz Humidity range non condensing Influence of axial vibration @1 m/s² CE/RoHS compliant, WEEE registered Weight

Open the catalog to page 4

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair - 5

G.R.A.S. 40GI 1/2" Prepolarized Intensity Microphone Pair Date 10-06-2013. Page 5 of 5 Tradition Since the establishment in 1994, G.R.A.S. have been 100% dedicated to developing and manufacturing high-quality measurement microphones and related acoustic equipment. Founded by the Danish acoustics pioneer Gunnar Rasmussen who for more than 60 years has contributed to the world of sound and vibration with his unique ideas and designs. From the first reproducible 1” condenser measurement microphone that enabled quality measurements and instrumentation for acoustic calibration, Mr. Rasmussen’s...

Open the catalog to page 5