Catalogs >
Goulds Pumps >
Goulds V 3298 Chemical Process Pumps

Goulds V 3298 Chemical Process Pumps
20Pages

Catalog excerpts

Chemical Process Pumps

Goulds 3298 Chemical Process Pumps N N 3298 Close-Coupled Standard Design Performance Features for Chemical Services N Extended Pump Life • Tefzel® (ETFE) Construction • Sealless Design • Stationary Silicon Carbide Shaft • Optional Silicon Carbide DryguardTM Bearings • Non-slip Synchronous Drive • Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps N Ease • Minimum Parts • No Pump/Motor Alignment Required with Close-Coupled Design • ANSI Dimensional • Optional Frame-Mounted Design • No Mechanical Seal N Safety • Drive and Driven Magnet Assembly Safety Clearances...

Open the catalog to page 2

Goulds V 3298 Chemical Process Pumps - 3

3298 Chemical Process Pumps Design Features for Wide Range of Process Services CLOSE-COUPLED DESIGN Arrangement eliminates need to perform pump/motor alignment. Single piece, dual bolt circle adapter accommodates all motor sizes for maximum application flexibility. FULLY CONFINED O-RING TEFZEL* LINING WITH DUCTILE IRON CASING Sealed to casing for zero leakage. Acid-resistant Viton standard other materials available. One-piece solid casing lined with minimum 1/8 inch (3 mm) TEFZEL*. Rotolining process assures mechanical integrity of lining. ONE-PIECE ENCLOSED IMPELLER CLAMP RING Pressure...

Open the catalog to page 3

Goulds V 3298 Chemical Process Pumps - 4

Exceptional Performance for Chemical Services 10X More Dry Run Protection 10X More Dry Run Protection with Dryguard™ Bearings Goulds unique DryguardTM diamond-like carbon coating significantly reduces the coefficient of friction enabling periods of safe operation under dry run conditions. DryguardTM is up to 1.5X harder than silicon carbide, ensuring its protection lasts throughout the life of the pump. Power Monitors No pump is designed to run dry for an extended period of time. Goulds recommends that pumps be protected with a power monitor. Easy to install and easy to operate, power...

Open the catalog to page 4

Goulds V 3298 Chemical Process Pumps - 5

Reliable, Simple – Easy To Maintain Design Features for Extended Pump Life Casing with TEFZEL® Lining One-piece solid ductile iron casing with Tefzel® lining. Generous lining thickness of 1/8 inch (3 mm). Rotolining process assures integrity of lining. Rugged foot mounted design provides maximum resistance to and distortion from pipe loads. Flange loads are the same as metal ANSI pumps. Casing drain allows complete evacuation of pump fluid. Radial and Thrust Bearings Multiple materials available to best suit your pumping application: Carbon, pure sintered Silicon-Carbide or Dryguard™. All...

Open the catalog to page 5

Goulds V 3298 Chemical Process Pumps - 6

Parts List and Materials of Construction Item Number Part Name Casing Impeller Assembly Bearing Spider Bearing End Cover (Frame-Mounted) Ball Bearing (Frame-Mounted) Plug– Oil Fill (Frame-Mounted) Stationary Shaft Drive Shaft (Frame-Mounted) Clamp Ring Rub Ring (M&L Frame-Mounted) Bearing Spacer–Radial Key, Impeller to Bearings Key, Drive Carrier Radial Bearing Bearing, Reverse Thrust Bearing, Impeller Thrust Rear Impeller Wear Ring (M and L Group only) Set Screw (Close-Coupled) Frame Frame Foot Retaining Ring, Impeller/Driven Magnet Assembly Labyrinth Seal (Frame-Mounted) Lip Seal...

Open the catalog to page 6

Goulds V 3298 Chemical Process Pumps - 8

Hydraulic Coverage Model 3298 All dimensions in inches and (mm). Not to be used for construction.

Open the catalog to page 8

Goulds V 3298 Chemical Process Pumps - 9

All dimensions in inches and (mm). Not to be used for construction. CP Motor Frame Bare Pump Dimensions Group Frame Mounted

Open the catalog to page 9

Goulds V 3298 Chemical Process Pumps - 10

Model SP 3298 for Self-Priming Applications When suction lift conditions exist, air must be evacuated to effectively prime the pump. This air or vapor must be expelled each time the pump is started. The Goulds design incorporates a highly reliable one-piece casing without the use of an internal check valve or external gooseneck. Optimally-sized Casing Retains enough liquid to prime but not too much to increase fluid temperature during priming. Temperature rise is half of the competition. Retained Liquid Integrated suction gooseneck keeps all bearings fully submerged to ensure lubrication...

Open the catalog to page 10

Goulds V 3298 Chemical Process Pumps - 11

All dimensions in inches and (mm). Not to be used for construction. Bare Pump Dimensions

Open the catalog to page 11

Goulds V 3298 Chemical Process Pumps - 12

Model V 3298 In-Line Design for Cost Savings In-Line Design for Cost Savings Vertical Configuration Vertical casing frees up additional floor space required for pump. In-line pumps have become increasingly popular due to minimal floor space required and reduced installation costs. Installation is simple since the unit is mounted directly in the line, like a valve. Field alignment is not required and the unit is not subject to misalignment due to pipe strain or temperature changes. Self-Venting Design Containment shell and magnet area expel all trapped air/gases completely and efficiently...

Open the catalog to page 12

Goulds V 3298 Chemical Process Pumps - 13

All dimensions in inches and (mm). Not to be used for construction.

Open the catalog to page 13

Goulds V 3298 Chemical Process Pumps - 14

Leadership in Sealless Pump Technology Model 3299 Heavy-Duty Lined Chemical Pump PFA Construction for Universal Corrosion Resistance to 360˚F (182˚C) Virgin Teflon® (PFA) is virtually inert to all chemicals and has good abrasion resistance. PFA lined casing, bearing carrier, containment shell, and one-piece impeller/shaft assembly provide superior corrosion resistance and long life, unequalled by alloy pumps. Designed for Safe Operation Dry Run Capability Standard DryguardTM Silicon Carbide Bearings Provide the corrosion resistance and durability of silicon carbide with short term dry run...

Open the catalog to page 14

Goulds V 3298 Chemical Process Pumps - 15

Hydraulic Coverage

Open the catalog to page 15

Goulds V 3298 Chemical Process Pumps - 16

Leadership in Sealless Pump Technology Model 3296 EZMAG Containment Shell The containment shell is the most important component isolating the pumpage from the atmosphere. N The containment shell is a deep-drawn single piece design made from Hastelloy C for reliable corrosion resistance. N The vortex-breaking bead at the bottom of the can prevents erosion. N Burst pressure is greater than 2,175 psi. Bearing Cartridge Individual bearings are contained in a single cartridge assembly. N Bearings are made of highly abrasion and corrosion resistant silicon carbide. Dryguard™ bearings are...

Open the catalog to page 16

Goulds V 3298 Chemical Process Pumps - 17

Hydraulic Coverage

Open the catalog to page 17

Goulds V 3298 Chemical Process Pumps - 20

Sealless Selection Chart High Alloys Stainless Steel ETFE TEFZEL® Limited Floor Space Installation Considerations Visit our Web site at www.gouldspumps.com © 2007 Goulds Pumps, Incorporated A subsidiary of ITT Corporation

Open the catalog to page 20