Goulds HS Horizontal Hydro-Solids Pump

Goulds HS Recessed Impeller Pump Designed for Handling Large Solids Entrained Air and Fibrous Materials • Capacities to: 7,000 GPM (1,590 m3/h) • Heads to: 140 feet (43 m) Design Features • Recessed, Non-Clog Impeller • Back Pull-Out Design • Extra Thick Casing and Impeller • Available in Cast Iron, High Chrome Iron, and 316 SS • Temperatures to: 200°F (93°C) • Pressure to: 100 PSIG (690 kPa) • Solids to: 10 inches (254 mm) Services: • Waste Treatment Plants: Raw Sewage, Sewage Sludge, Water, Resin, and Fiber, Water and Ashes, Textile Mill Effluent • Pulp and Paper: Paper Stock, Plant Effluent,...

HS Hydro-Solids Pump BEARINGS AND FRAME Rigidly maintains alignment between bearing frame and casing. Four frames accommodate all sizes. Available with oil or grease. Fully recessed for handling large, stringy, fibrous solids. Pump will pass any material entering pump suction. SHAFT AND SHAFT SLEEVE Full length hook-type sleeve protects shaft from traces of abrasive slurry. Easily accessible for service. Accommodates packing or mechanical seals. Heavy duty concentric casing virtually eliminates radial shaft loading and extends bearing life. The HS Family Provides Pumping Versatility HSUL Submersible...

Visit our website at www.gouldspumps.com Mechanical Specifications and Dimensional Data Pump Size Bearing Frame 240 Fall Street Seneca Falls, NY 13148 www.itt.com © 2014 Goulds Pumps, Incorporated A subsidiary of ITT Corporation