GOULDS PUMPS Goulds Model 5500 Severe Duty Slurry Pumps Goulds Pumps

Ids Model 5500 is the result of many years of experience designing and building severe duty slurry pumps. It's not only built to stand up to the toughest abrasive slurry services, but also is designed for extreme ease of maintenance and safety. A heavy duty bearing frame and shaft, extra thick wall sections and easily replaceable wear parts add up to many years of service even under the severest operating conditions. Designed to Handle the Severest Abrasive Slurries Design Features Large Diameter Impeller Develops higher heads at lower operating speeds. Extra Heavy Duty Shaft Assures minimum...

Extra Heavy Duty Features for Handling Severest Abrasive Slurries With grease barrier for positive bearing housing sealing. Simple, rugged design. Oil lubrication EXTRA HEAVY DUTY SHAFT Long bearing span and large diameters reduce shall rlelleclion, extend bearing and packing life. Ideally suited (or mounting large motors overhead. FREE STANDING FABRICATED STEEL FRAME For sate and easy Installation; no cracking. KNOCK-OFF DEFLECTOR For easier impeller removal and added bearing protection. SHAFT SLEEVE Hook-type, extra thick for long life, reduced maintenance. Optional ceramic sleeve available...

Designed for Ease of Maintenance Dynamic Seal Cast-In Lifting Lugs components facili- less downtime, lower maintenance tools required. Flat Bottom Bearing Housing assures positive Less maintenance Other Features Optional Impeller Hook Allows fast, easy, safe removal of impeller: less downtime. Bottom Oil Drain Speeds oil changes—less downtime, lower maintenance cost. Dead-Set Bearings No shims, adjusting rings or springs. Simple, accurate—less downtime, lower maintenance cost. Generous Access To Stuffing Box Facilitates servicing stuffing box for extreme ease of mainte- nance; less downtime....

Sectional View Model 5500 MODEL 5500 HP DYNAMIC SEAL SLURRY MECHANICAL SEAL WITH (HIGH PRESSURE PUMP) (EXPELLER OPTION) SLURRY SEAL CHAMBER

Model 5500 HP High Pressure, Heavy Duty Slurry Pump Heavy Duty Casing For high pressures and abrasive services. Two-Piece Suction Cover and Liner Provides temporary secondary containment: pump will operate until shut down for repair. 400 Lb. Flanges For high pressure pumping. Maximum Interchangeability With 5500 Goulds Model 5500 HP is designed to handle tough staged or series pumping. It's built with all the proven features of the standard 5500 making it the most reliable and maintenance- friendly pump in the industry.

C -2W PSKi (1724 ttPa) .-■■.<■ i 3 -1 PSK) • kPa) b*M D-BOO PSKi (1724 KP«> *orkmo'750 PSKi (3S*4 kPe) Ml Toughest Services Modal 5500 with 450 HP motor-mount*! overhead on gold taOngs reclamation tervice. The Model 5500 severe duty slurry pumps are engineered and manufactured for dependable performance and long life. Tested under punishing conditions, these heavy duty pumps stay the course and keep working efficiently. Designed for minimal maintenance, Model 5500 pumps are extremely easy to service when necessary. They are backed by Goulds parts and Goulds service, so long life in continuous...

All dimensions in inches and (mm). Not to be used (or construction.

Only Goulds Own Foundry Produces The High Chrome Iron Necessary To Make A Pump As Any pump is only as good as the material it's made from, and Goulds standards could accept only HC600: high chrome iron from our own foundry. In actual field applications. HC600 has been subjected to testing in the most severe slurry services. It has met and exceeded expectations at every site. Goulds painstakingly produces HC600 in our own foundry for its unsurpassed combination of abrasion and corro- sion resistance. Every heat (i.e. production run) is sampled and analyzed. The alloy is adjusted to strin- gent...

All dimensions in inches and (mm). Not to be used (or construction.