Catalogs >
Goulds Pumps >
Goulds 3298 Chemical Process Pumps

Goulds 3298 Chemical Process Pumps
20Pages

Catalog excerpts

Goulds 3298 Chemical Process Pumps

Goulds 3298 2 Ideal for Moderate to Severe Corrosives! The 3298 can handle the tough chemical services. As a sealless design, it’s an effective alternative to pumps with mechanical seal problems. Meets strictest EPA regulations. V 3298 Space-Saving Vertical In-Line SP 3298 Self-Priming 3298 Close-Coupled Standard Design Chemical Process Pumps Capacities to 1,200 GPM (270 m3/h) Heads to 350 feet (162m) Temperatures to 250° F (121°C) Pressures to 225 PSIG (1551 kPa) Performance Features for Chemical Services Extended Pump Life • Tefzel® (ETFE) Construction • Sealless Design • Stationary...

Open the catalog to page 2

3 *E.I. DuPont Reg. Trademark RARE EARTH MAGNETS High strength neodymium iron, provide high torque and hard-start capability without slip. Drive is synchronous. CONTAINMENT SHELL TEFZEL* lining with glass reinforced vinylester backing. Rugged design with burst pressure greater than 500 psi. Non-metallic construction provides efficiencies same as sealed ANSI pumps. (30% higher efficiencies than metal sealless pumps.) RADIAL BEARING WITH TEFLON* SPACER Two-piece design with Teflon* spacer allows bearings to self-align under load. Independent movement maximizes bearing life. Carbon bearing...

Open the catalog to page 3

Goulds 3298 4 Exceptional Performance for Chemical Services 10X More Dry Run Protection TEFZEL® Construction for Extreme Corrosion Resistance TEFZEL® (ETFE) is inert to most chemicals, and has good abrasion resistance. TEFZEL® lined casing and containment shell with solid TEFZEL® impeller provide superior corrosion resistance and long life unequalled by alloy pumps. Power Monitors No pump is designed to run dry for an extended period of time. Goulds recommends that pumps be protected with a power monitor. Easy to install and easy to operate, power monitors will ensure extended time between...

Open the catalog to page 4

Goulds 3298 5 Reliable, Simple – Easy To Maintain Design Features for Extended Pump Life Extreme Ease of Maintenance Design Concept The 3298 design concept is simple — few parts and only one bolt size. One-craft maintenance is all that’s required — with one wrench! Planned maintenance is fast and easier than other process pumps – sealed or sealless. Standard close-coupled model eliminates need to perform time consuming pump and motor alignment. Simple Operation Unlike most magnetic drive pumps, the 3298 is as easy to operate as any standard ANSI pump. Non-metallic construction with no heat...

Open the catalog to page 5

Goulds 3298 6 Item Number Part Name Material 100 Casing Ductile Iron/TEFZEL* 101 Impeller Assembly TEFZEL 101A Bearing Spider TEFZEL/Silicon Carbide, Optional–TEFZEL/Dryguard™ 109A Bearing End Cover (Frame-Mounted) Ductile Iron 112 Ball Bearing (Frame-Mounted) Steel 113A Plug–Oil Fill (Frame-Mounted) Steel 122A Stationary Shaft Silicon Carbide, Optional–Dryguard™ 122B Drive Shaft (Frame-Mounted) Steel 141C Clamp Ring Ductile Iron 144A Rub Ring (M&L Frame-Mounted) Cast Iron 157A Bearing Spacer–Radial TEFLON* 178S Key, Impeller to Bearings TEFLON 178Y Key, Drive Carrier Steel 197B Radial...

Open the catalog to page 6

Goulds 3298 8 Hydraulic Coverage Model 3298 All dimensions in inches and (mm). Not to be used for construction.

Open the catalog to page 8

Goulds 3298 Model SP 3298 for Self-Priming Applications When suction lift conditions exist, air must be evacuated to effectively prime the pump. This air or vapor must be expelled each time the pump is started. The Goulds design incorporates a highly reliable one-piece casing without the use of an internal check valve or external gooseneck. Optimally-sized Casing Retains enough liquid to prime but not too much to increase fluid temperature during priming. Temperature rise is half of the competition. Retained Liquid Integrated suction gooseneck keeps all bearings fully sub mer ged to ensure...

Open the catalog to page 10

Goulds 3298 11 Hydraulic Coverage Model SP 3298 Dimensions Model SP 3298 All dimensions in inches and (mm). Not to be used for construction. A CP X D X D S S Y Motor Frame CP (Approx.) 143TC 21 (533) 145TC 20 (508) 182TC/184TC 24 (610) 213TC/215TC 27.63 (702) 254TC/256TC 32.12 (816) 284TSC/286TSC 32.12 (816) Size A D S X Y Close-Coupled Frame-Mounted 1 X 11/2-6 15.5 (393.7) 11.5 (292.1) 4.0 (101.6) 7.25 (184.2) 7.5 (190.5) 160 lbs. (72.7 kg.) 175 lbs. (79.5 kg.) 2 X 3-6 15.5 (393.7) 13.5 (342.9) 6.0 (152.4) 10.75 (273.1) 12.12 (307.8) 198 lbs. (90 kg.) 213 lbs. (96.8 kg.) Bare Pump...

Open the catalog to page 11

Goulds 3298 12 Model V 3298 In-Line Design for Cost Savings In-Line Design for Cost Savings In-line pumps have become increasingly popular due to minimal floor space required and reduced installation costs. Installation is simple since the unit is mounted directly in the line, like a valve. Field alignment is not required and the unit is not subject to misalignment due to pipe strain or temperature changes. Additional Dry- Run Protection With the vertical design, the front thrust bearing will always be submerged in liquid. This unique feature adds an extra measure of dry run protection....

Open the catalog to page 12

Goulds 3298 14 PFA Construction for Universal Corrosion Resistance to 360°F (182°C) Virgin Teflon® (PFA) is virtually inert to all chemicals and has good abrasion resistance. PFA lined casing, bearing carrier, containment shell, and one-piece impeller/shaft assembly provide superior corrosion resistance and long life, unequalled by alloy pumps. Model 3299 Heavy-Duty Lined Chemical Pump Dry Run Capability Standard DryguardTM Silicon Carbide Bearings Provide the corrosion resistance and durability of silicon carbide with short term dry run capability without the catastrophic failure modes of...

Open the catalog to page 14

Goulds 3298 16 Leadership in Sealless Pump Technology Model 3296 EZMAG Bearing Cartridge Individual bearings are contained in a single cartridge assembly. Bearings are made of highly abrasion and corrosion resistant silicon carbide. Dryguard™bearings are available for protection against occasional dry run conditions. In the event of bearing failure, the cartridge design contains the bearings and prevents further damage to pump internals. Installation and replacement of bearings is simple. Only one component to install. Maintenance Made Simple The 3296 EZMAG was designed with the end user in...

Open the catalog to page 16