Paper Stock / Process Pump with i-ALERT Patented Intelligent Monitoring

3180 Worldwide Experience on Process Pumping Services When Goulds developed the 3180, we utilized 140 years of pump design experience to ensure it would have unmatched mechanical reliability. Today, installations around the world attest to its remarkable performance. The 3180 is the heavy duty process pump designed to handle all of your tough process pumping applications. • Capacities to 45,000 GPM (10,220 m³/h) • Heads to 410 feet (125 m) • Temperatures to 446° F (230° C) • Pressures to 232 PSIG (16 bar) World-class Pump Line Model 3180 is built to ANSI standards. • ANSI class 125 / 150 lb flange...

A Proven Performer Featuring Patented i-ALERT® Intelligent Monitoring PATENTED I-ALERT® CONDITION MONITOR Constantly measures vibration and temperature at the thrust bearing. Colored LEDs indicate general pump health. Provides early warning of improper operation before catastrophic failure occurs. SEALING FLEXIBILITY Choice of mechanical seal (illustrated), packed box or dynamic seal. STANDARD LABYRINTH OIL SEALS PATENTED TAPERBORE™ PLUS SEAL CHAMBER Wide range of sealing arrangements available to meet service conditions. Patented seal chambers improve lubrication and heat removal (cooling) of...

Engineered Impeller and Sideplate Acknowledged Best Design for Industrial Process Services. It offers: • Ease of adjustment to maintain optimum performance • Clamped sideplate for maximum reliability and zero leakage • Minimum hydraulic loads for maximum mechanical reliability 1. Renewable High-Performance Easy and Reliable With any impeller adjustment there will be two metal components that will have to move relative to each other. Goulds puts this precision fit in the sealed and lubricated environment of the power end. Easy and accessible adjustments. The Goulds adjustment bolts are very accessible...

3. Minimum Hydraulic Loads For Maximum Reliability and Zero Leakage Maximum Mechanical Reliability Our sideplate is clamped securely and sealed positively to ensure that it does not lead to breakage or leakage. Goulds open impeller design was engineered to assure minimum radial and axial thrust loads to maximize seal and bearing life. 1 Full Back Shroud Maximizes mechanical integrity 2 Balance Holes Low axial thrust 3 Engineered Back Vanes Extended seal and bearing life Back vane height / angle and shroud design are engineered to minimize hydraulic loads throughout the life of the pump. Bearing...

Power Ends Designed for Maximum Reliability Power End Reliability is vital when thinking about pump mean time between failure (MTBF). To ensure maximum bearing life, the 3180 follows four key factors: 2. Bearing Temperature Keeping the pump loads minimized and selecting the “right” bearing will keep bearing temperature under control. • Bearing Design Life • Bearing Temperature • Bearing Environment • Continuous Condition Monitoring Typical bearing operating temperatures of competitor’s process pumps are between 140–160° F. Goulds Model 3180 bearing temperatures average only 120° F (50° C)! 1....

A visual indication of pump health makes walk-around inspections more efficient and accurate. The result is a more robust process to monitor and maintain all your pumps so that your plant profitability is maximized. Labyrinith Oil Seals are Standard Contamination being the second leading cause of bearing failure requires special attention. Common lip seals were not considered due to their 2,000 hour design life. After wearing out, there will be an open passage way for contamination. Failures can happen between monitoring intervals Normal monitoring interval Onset of failure goes undetected A...

3180 Impeller Designs to Optimize Performance The right design for the service results in optimum efficiency and up-time, especially when handling difficult media such as recycle fibers with contaminants. Open Impeller Design suitable for most services. Allows for resistance to wear and corrosion. Provides for easily renewable clearances. Designed for optimum efficiency. The Goulds Shearpeller™ Solves this Problem: • Generous front clearance with vortex-type design to prevent binding and plugging. • Patented tapered inlet sleeve prevents contaminants from plugging inlet area. The sleeve is loose...

extended seal and pump life and lower maintenance costs. Dynamic seal Solids / liquid mixture flows toward mechanical seal /seal 2 chamber. For Elimination of Mechanical Seal Problems; Reduced Maintenance Turbulent zone. Some solids continue to flow toward shaft. Other solids are forced back out by centrifugal force (generated by back pump-out vanes). Clear liquid continues to move toward mechanical 4 seal faces. Solids, air, vapors flow away from seal. Low pressure zone created by Vane Particle Ejector. Solids, air, 5 vapor liquid mixture exit seal chamber bore. Goulds Dynamic Seal option is...

TOTAL HEAD - METERS TOTAL HEAD - METERS

TOTAL HEAD - FEET TOTAL HEAD - FEET

Parts List and Materials of Construction Material All Iron/CD4 impeller, CD4 Sideplate Cast Iron Cast Iron Carbon Steel Item Number Part Name 100 (E sizes are not available in Iron) Lantern Ring (E sizes are not available in Iron) PTFE PTFE Impregnated Fibers Frame Adapter³ Ductile Iron Duplex Angular Contact Thrust Bearing Shaft Sleeve Shearpeller™ Sleeve Bearing Housing Bearing Locknut and Lockwasher Seal Chamber (Mechanical Seal) Case Wear Ring (Enclosed Impeller) Suction Sideplate (Open Impeller) Carbon-filled PTFE Cast Iron Steel Cast Iron Cast Iron Carbon Steel Cast Iron Carbon Steel Cast...

Sectional View S, M, L and XL Mechanical Seal Option Enclosed Impeller Option • Packed Stuffing Box • Oil Lubrication • Open Impeller Illustrated: • Packed Stuffing Box • Oil Lubrication • Open Impeller

DIMENSIONS Group All dimensions in inches. Not to be used for construction.