MULTI-FUNCTION HITCHING All-in-one tool – inspection body approved For fitting on forklift forks. 2 models For towing and lifting Container for the storage of accessories Strengthened combination hook / ø 50 coupling head / Top ring with 50mm inside dia. Removable 3-point hitch or pushbar mounting 2T lifting hook with safety latch 4-tonne load on Walterscheid automatic hooks with locking in open position, 38 diam. -distance between hooks adjustable from 630 to 1030 mm Sliding boom with interchangeable jaw or ring - 2.5T towing force One 3-tonne lifting hook located underneath, between the sleeves (engine lifting) Open-end guides Automatic safety lock on the forks Removable stop at end of forks the can be used for pushing Option Automatic rotating yoke ATTENTION : Prior to use, accesory + forklift acceptance procedures must be carried out by your authorised inspection body. — Handling of agricultural machines — Made-to-measure according to the application from the basic version, AMP30000. — Fork pick-up in guides with an inside section of 170x70 – centre distance 800mm — Static vertical load on the combination hook: 375kg — Forklift truck fork grip — Maximum towable load on the ball hitch: 3T5 — Three-point towing with hooks and adjustable push bar boom — Telescopic boom with hook for towing trailer, spreader, etc… — Type-approved by a regulatory control body AMP05000 2 functions: towing or lifting — 2T load on the inner lifting hook — Fork guides, length 1250mm — Weight 80kg — Options: hydraulic fork grip and removable boom arm 69