TSS Tailor-made special hoppers 58

I Central emptying by trap with helmet. 1 basic capacity of 585 litres without extension Manual opening using dual levelAperture dimensions 300 x 240 mm Version with or without wheels tCD CHARACTERISTICS Capacity — 1 basic capacity of 585 litres and 2 adaptable extension frames increasing capacity to 1085 or 1585 litres — Controlled emptying flow, return spring on the helmet — Helmet hinges mounted on bearings — Fork sleeves aperture : 170 x 70 mm. Spacing (F) : 850 mm-modifiable on request — Pedestal mounted models with pallet truck access points - Stackable — Castor mounted models have 2 fixed...

FD with optional special lid stackable feet Customised with castermounted frame FD with extension and Big-Bag handle hooks Helmet opening by lever High-capacity custom-made hopper in stainless steel 585 L stainless steel model Optional reduced aperture

I For transport and distribution of aggregates. Central emptying through gate. Front sliding trap-door CHARACTERISTICS — Capacity from 500 to 1400 litres — Lever locks in position for complete emptying — Fixed-foot models are stackable — Safety chain included — Castor-mounted models have 2 fixed + castors and a handrail - forward movement — For customised products, please contact us — Available options include : gate blocking device [pre-set notches) and a waterproof guillotine Full emptying with lever Castor-mounted 500 L model Load Castors Dimensions in mm for basic model [for guidance only)....

I Channeled emptying through base. Fork bottom lift. Standard model is pedestal-mounted CHARACTERISTICS — Capacities from 750 to 1500 litres — Empties via lower hinged trap-door. Aperture : — Lever for manual opening, remote control possible — Fork sleeves aperture : 170 x 70 mm. Spacing (F) : 750 mm — Safety chain included — For customised products, please contact us Dimensions in mm for basic model (for guidance only).

I Use with loading bucket to fill big-bags quickly. Clean work space. 2 versions: with removable or fixed legs Choose your hopper according to your loading" bucket dimensions 4 quick release hooks for keeping Big-Bag Adjustable legs height Pre-drilled plates secure hopper — Tubular base reinforced with gusset plates — Hopper: 3 mm sheet metal with reinforcing ribs — Clearance below hooks: 1650 mm — 1 model TBP05000, simplified structure with fixed legs, width 1.70m (no options possible] — Tip: place a pallet under big-bag facilitating its removal, and never have burden on hooks — Available options...

Filling and handling of the big-bag. Painted or 3 widths.Permissible load 2 tonnes. Approved by body of control. galvanized depending on the width of the loading bucket on forklift truck forks Automatic locking on forks enabling the bag to be unhooked going backwards supporting the suspended toad CHARACTERISTICS — 3 mm steel panel hopper with reinforcement pleats — Forks gripped in 5 mm thick sleeves, 170 x 55 int. passage, — Distance between hooks 900 x 975 mm O ATTENTION : Prior to use, accesory + forklift acceptance procedures must be carried out by your authorised inspection body. Steep edges...

TAILOR-MADE SPECIAL Tell us your technical requirements and we will build your hoppers to measure ! Opening control by manual lever or handle. Controlled and channeled emptying. Painted, galvanized or stainless steel finish. Sealed sliding hatch Sliding hatch and special downspout Diaphragm valve Lever buttery valve Offset helmet hopper Dual-helmet hatch Version on base or on wheels. Various chutes. Hopper with breathing pipes Handwheel butterfly valve Sliding hatch on external rollers

TAILOR-MADE SPECIAL Spherical ball valve Articulated rotating hatch Pinch valve Reinforced by anti-punching flanges Sealed sliding hatch Crane grip helmet hopper Round chute, sealed by eccentric lever Basic sliding hatch for light products Flow adjustment sliding hatch with reduction gearing and angle gearing