BIG-BAG FILLER BUCKETWITH HYDRAULIC FLAP - 2T LOAD Direct lifting on forks. Simultaneous material pick-up from the ground/floor and big-bag filling. Certified by an approved body Increased productivity and safety - Accurate and fast filling Filling productivit (10 big bags in 10 minutes) Ideal for loading sand, gravel, cereals, aggregates, etc. Precise dosing using the flap controlled directly from the forklift 4 exterior hooks for big-bag 1m3 4 interior hooks for big-bag 0.25 and 0.5 m3 1 REGULATORY VERIFICATION: Before adequacy between the lifting accessory, the fork-lift/crane and the use. O RECOMMENDED FORKLIFT: 4.5T capacity forklift truck - with forks length 1200 max / forks Lg 1000 max and 3T forklift for GBP05000. Only 1 auxiliary hydraulic connection is required — Capacity 1430 litres for loading 1m3 big-bags — Pick-up width 2080 mm — 2 x 100x50 double-acting cylinders for the loading function — 1 x 40x25 double-acting cylinder for the cover opening function — Automatic system for controlling the 2 functions via a single hydraulic connection Caution: The 2 functions run one after the other without any dead time. — 3/8” push-pull connection to accessory (hose to the fork-lift not supplied) — Cover hatch 350 x 450 mm — Locks on forks with 8 mm diameter lifting chains — Removable counter blade — 4 quick-release big-bag sling points — 250 or 500 litre big-bag filling possible with optional kit — Bag lifting MWL 2 T 1- lower the bucket and fill it For loading big-bag of: 0,25 m3 0,5 m3 1 m Overall Pick-up Overall Center Weight profile width height distance section kg Dimensions shown in mm excluding options and without engagement.