Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. GOUBARD
  3. BARREL INVERTER RB

BARREL INVERTER RB

BARREL INVERTER RB
1 / 1 PageView full catalog

BARREL INVERTER RB

Product catalog summary
Overview: The RBBARREL Inverter is designed for fitting onto forklift truck forks to handle, transport, and control the draining of standard metal barrels with a diameter of 572 mm. There are three models available, each with specific features and capabilities.
Common Characteristics:
  • Permissible load capacity of 350 kg.
  • Fork grip in sleeves with an internal cross-section of 170 x 70 mm.
  • Safety system on fork end provided by a removable pin.
  • Barrel secured by an articulated steel belt and adjustable eccentric closure with a safety pin.
  • 360-degree rotation with stops in all positions.
Model-Specific Features:
  • RBP30000: Lower centre-section grip tilter, weighing 80 kg.
  • RBP20000: Upper grip inverter, weighing 130 kg, with options for remote control by chain steering wheel, special distance between forks, and different barrel diameters upon request.
  • RBP10000: Barrel inverter for rotating head forklift, weighing 70 kg.
Additional Specifications:
  • Distance between forks is fixed at 850 mm, with wider distances available on request.
  • Adjustable eccentric closure for secure barrel handling.
  • Height of feet is adapted for central and vertical grip of the barrel.
  • Hinge at the end of forks for enhanced maneuverability.
  • Nylon pads to protect the ground and feet for horizontal stability.
  • Handwheel operating reduction gearing for tilting, requiring 20 turns to move 90 degrees, with an automatic braking system.
  • Articulated belt width of 230 mm, positioned between the two ribbed areas.
  • Distance between middle forks is 700 mm, modifiable upon request.
See more

Catalog excerpts

BARREL INVERTER RB-1

BARREL INVERTER FITTED TO FORKLIFT TRUCK FORKS For standard metal barrels, 572 mm in diam. For handling, transportation and controlled draining of barrels. 3 models. Lower centre-section grip tilter - Weight 80 kg Tilted by reduction gearing (20 turns of the handwheel to move 90 degrees) with automatic braking system — Permissible load 350 kg — Fork grip in sleeves with a int. cross-section of 170 x 70 mm — Fork end grip safety system with removable pin — Barrel is held in position by articulated steel belt and adjustable eccentric closure with safety pin Distance between forks — 360 degree rotation with stops in all positions — Options on RBP20000 : remote control by chain steering wheel, special distance between forks, different barrel diameters (on request) depending on options Height of feet adapted to the Safety system on fork end eccentric closure central and vertical grip of the barrel Upper grip inverter - Weight 130 kg Barrel inverter for rotating head forklift - Weight 70 kg Tilting with rotating head between middle forks 700 mm (can be modified) Nylon pads Secure draining of steel barrels, approximate nominal diameter of 572 Feet for horizontal stability Handwheel operating Tightening of barrel by belt steel articulated reduction gearing Articulated belt width 230 mm, positioned between the 2 ribbed areas Distance between sleeves of 850 mm (wider distances available on req

 Open the catalog to page 1

All GOUBARD catalogs and technical brochures

  1. FRU-SRF
    FRU-SRF

    1  Page

  2. MULTI-FUNCTION AM HITCHING
    MULTI-FUNCTION AM HITCHING

    1  Page

  3. JIB FOR WELDED WIRE MESH
    JIB FOR WELDED WIRE MESH

    1  Page

  4. BIG-BAG FILLER BUCKET
    BIG-BAG FILLER BUCKET

    1  Page

  5. TIPPING SKIP
    TIPPING SKIP

    1  Page

  6. TIPPING SKIP MULTI-USE
    TIPPING SKIP MULTI-USE

    2  Pages

  7. TB-F
    TB-F

    1  Page

  8. SKIP FOR FORKLIFT WITH ROTATING HEAD BRS
    SKIP FOR FORKLIFT WITH ROTATING HEAD BRS

    1  Page

  9. VITICULTURE TIPPING SKIP REDUCED-HEIGHT
    VITICULTURE TIPPING SKIP REDUCED-HEIGHT

    1  Page

  10. TIPPING SKIP CUSTOMISED VERSION
    TIPPING SKIP CUSTOMISED VERSION

    2  Pages

  11. OPEN TIPPING SKIP
    OPEN TIPPING SKIP

    1  Page

  12. VACUUM – READY SKIP TIPPING VERSION
    VACUUM – READY SKIP TIPPING VERSION

    1  Page

  13. VACCUM-READY TIPPING SKIP
    VACCUM-READY TIPPING SKIP

    1  Page

  14. SKIP WITH LIFTING BEAM ATTACHMENT AND HANDLE
    SKIP WITH LIFTING BEAM ATTACHMENT AND HANDLE

    1  Page

  15. TIPPING SKIP WITH LIFTING BEAM
    TIPPING SKIP WITH LIFTING BEAM

    1  Page

  16. LIFTING BEAM FOR EMPTYING CP SKIPS
    LIFTING BEAM FOR EMPTYING CP SKIPS

    1  Page

  17. TIPPING SKIP WITH FRONT DOOR
    TIPPING SKIP WITH FRONT DOOR

    2  Pages

  18. LOW TIPPING SKIP WITH FRONT DOOR
    LOW TIPPING SKIP WITH FRONT DOOR

    1  Page

  19. TIPPING FRAME
    TIPPING FRAME

    1  Page

  20. DUMPING BUCKET WASTE DISPOSAL
    DUMPING BUCKET WASTE DISPOSAL

    1  Page

  21. DROP BOTTOM SKIP WITH HEEL CAGE SAFETY
    DROP BOTTOM SKIP WITH HEEL CAGE SAFETY

    2  Pages

  22. DROP BOTTOM SKIP HINGED STIRRUP SAFETY
    DROP BOTTOM SKIP HINGED STIRRUP SAFETY

    2  Pages

  23. DROP BOTTOM SKIP WITH POLYETHYLENE LID
    DROP BOTTOM SKIP WITH POLYETHYLENE LID

    1  Page

  24. DROP BOTTOM SKIP ECO MODEL – LOAD 1000 KG
    DROP BOTTOM SKIP ECO MODEL – LOAD 1000 KG

    1  Page

  25. REINFORCED DROP BOTTOM SKIP FOR AGGREGATES
    REINFORCED DROP BOTTOM SKIP FOR AGGREGATES

    1  Page

  26. SKIP FOR FORKLIFT WITH ROTATING HEAD
    SKIP FOR FORKLIFT WITH ROTATING HEAD

    2  Pages

  27. SLOPED-BOTTOM SKIP WITH FRONT DOOR
    SLOPED-BOTTOM SKIP WITH FRONT DOOR

    1  Page

  28. EASEL BOTTOM OPENING
    EASEL BOTTOM OPENING

    1  Page

  29. HANDLING SKIPS
    HANDLING SKIPS

    54  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.