PROFITEST H+E EASY CHECK Function Tester for AC Charging Points per IEC 61851-1, VDE 0122-1 • Automatic function tester for AC charging points • Also for AC charging points with permanently attached cable • Easy to use – even for laypersons • Automatic test sequence saves time and money • Results appear in plain text at the display • Error display with results for forwarding to service personnel • USB interface for charging the battery The number of publicly accessible AC charging points made available by private operators is growing steadily. If the charging process can’t be started at an AC charging point, it’s usually assumed that the charging point itself has malfunctioned. As a result, the operator immediately calls in an electrician, even if the AC charging point isn’t the cause of malfunctioning. • Testing of AC charging points in charging mode 3 • Simulation of an electric vehicle charging socket • Connection to the charging socket or the type 2 plug of an AC charging point • Verification of values for 20 A and 32 A cables* The PROFITEST H+E EASY CHECK function tester for AC charging points makes it possible for laypersons such as system operators, service providers and facility managers to safely check the functionality of the AC charging point in such cases. Specialized personnel is only contacted in a targeted manner in the event of a diagnosed malfunction – i.e. when it’s actually necessary You save time and money. The PROFITEST H+E EASY CHECK can be used to test AC charging points with charging mode 3 and a type 2 connector socket or permanently attached type 2 cable. In addition to electrical testing in accordance with the standards, the tester also provides electricians with a full range of functional tests without the need for additional equipment such as a multimeter or an oscilloscope. Gossen Metrawatt GmbH * 32 A only if 20 A test fails • Testing of vehicle statuses A, B and C, phases, tOFF (status

PROFITEST H+E EASY CHECK Function Tester for AC Charging Points per IEC 61851-1, VDE 0122-1 Technical Data Mechanical Design Housing Ambient Conditions Operating temperature Storage temperature -5 … +60 °C Relative humidity Max. 75%, non-condensing, no condensation allowed Electromagnetic Compatibility Interference emission EN 55022, class A, for use in industrial environments Interference immunity Power Supply Internal rechargeable battery (charging via USB port) Micro USB (for battery charging) Nominal voltage Internal memory The latest measurement is saved automatically Protective function...

PROFITEST H+E EASY CHECK Function Tester for AC Charging Points per IEC 61851-1, VDE 0122-1 Product Standards The tester has been manufactured and tested in accordance with the following safety regulations: IEC 61010-1 EN 61010-1 VDE 0411-1 Safety requirements for electrical equipment for measurement, control and laboratory use – General requirements Test instruments and test procedures Degrees of protection provided by enclosures (IP code) Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements Information technology equipment – Radio...