Oscillating Pumps
8Pages

Oscillating PumpsPUMPS Oscillating Pumps are self-priming, corrosion resistant, have no dynamic seals and are constructed from FDA accepted materials. Typical applications include film and microfilm processors; litho and graphic arts plate processors; detergent dispensing, chemical mixing, medical, scientific and laboratory equipment. Oscillating pumps are intended for replenishing, transfer and circulating installations. Features: • Corrosion resistant • Dry run capability • Hydraulically efficient • Quiet operation • No shaft seals • Flexible mounting and body discharge positions • Low current draw and heat rise • NSF certified models available 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Oscillating Pumps Overview 0818 081718 Pag

Oscillating Pumps Oscillating Pumps Overview Oscillating Pump Operation An elastomeric impeller extends through a spring and armature and into an electric coil. A diode in the circuit feeds impulses to the electrical coil 60 times per second. Each pulse draws the armature and impeller forward against the spring, causing the impeller to pump a volume of liquid out through the outlet port. The spring then returns the armature and impeller to their starting position, drawing liquid through the inlet. A valve in the impeller prevents backflow of liquid. Typical OEM applications include film...

Oscillating Pumps Valve Styles 2-Piece Valve Tubing Connectors Tubing connectors are made from chemicallyresistant, glass-reinforced polypropylene. Currently, 10 sizes and styles are available in any inlet/outlet combination. Required tubing size is listed with corresponding photo. Poppet Valve To modify the priming or performance characteristics of the pump, two valve options are available: poppet valve or 2-piece valve. The poppet valve provides the best priming capability and more positively prevents backflow through the pump. The 2-piece valve should be used when flow is required. Note:...

Oscillating Pumps GRI specializes in the adaptation of standard models to meet the ever-changing needs of the Original Equipment Market. Contact us if one of our standard models does not meet your specific requirements. Coils, Leads & Terminals Generally, electrical coils are available in 115V or 220V and 60 Hz. However, pumps have been supplied with 115V or 220V, 50 Hz coils, and with 12, 24, and 48 volt AC coils. In addition, coils can be constructed with different power capabilities to more effectively meet customer’s duty cycle needs. Leads can be up to 6 feet long with any termination....

PUMPS 14825 SeriesOscillating Pump Specifications 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Oscillating Pumps Overview 0818 081718 Page 5

PUMPS 15000 SeriesOscillating Pump Specifications 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Oscillating Pumps Overview 0818 081718 Page 6

PUMPS 17000 SeriesOscillating Pump Specifications TOTAL HEAD - MILLIMETERS 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com Page 7

Blank Page 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Oscillating Pumps Overview 0818