GRIpumps.com PUMPS A GORMAN-RUPP COMPANY Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment. Maximum System Pressure: 75 psi Approximate Weight: 3.52 lbs (1596.645 grams) Ports: 1" MHB Materials In Contact With Solution Motor: Integrated, Brushless DC Supply Voltage: 12-48 VDC Electronics Maximum Power: 300 Watts To protect the control board, each Integrity Series pump will be issued with a Maximum Power limit (Watts). To stay within this limit, the recommended fuse size (Amps) will be based on the voltage supplied. (Watts = Voltage X Amps) Motor Specifications Control Options • Direct Supply Voltage: Speed of the pump determined by the voltage supplied • Analog: 0-5v DC Signal • Digital: PWM • CAN-Bus: Option available • Tachometer: Feedback option available Maximum Fluid Rating Chart Controller Position Maximum Fluid Temp Rating Separate from pump 225°F (107°C) Within pump's housing Not Applicable Various factors influence the recommended maximum temperature rating. These factors play a role in determining the pump’s life and applied warranties. In some applications, a higher maximum fluid temperature rating may be warranted. Factors influencing maximum temperature rating include, but are not limited to: • Starting temperature of fluid in system • Ambient temperature • Required performance, application’s specifications • Run time Optional Agency Approvals RoHS/REACH UL778: Motor-Operated Water Pumps NSF61: Potable Water NSF372: Lead Content Many GRI pumps are RoHS & REACH compliant. For declarations by specific model numbers, please contact GRI. IP (Ingress Protection) IP66: No ingress of dust, protection against powerful water jets. IP67: No ingress of dust, protection against temporary water immersion. IP68: No ingress of dust, protection against continuous water immersion. 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpump

Integrity Series Pumps are designed and manufactured specifically for OEM customization. If you don’t immediately find a pump that meets your exact requirements, our dedicated Pump Team is ready to work with you in developing a solution specific to your application. 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com