INTG1 Series Circulation Pumps

Product catalog summary

Overview: The document provides technical specifications for the INTG1 Series pumps by Gorman-Rupp Industries, designed for Original Equipment Manufacturer (OEM) applications. The pumps can be customized to meet specific OEM requirements.

Materials: The components in contact with the solution are made from PPS (Ryton®) for the body, impeller, bearing plate, housing, and rotor shell. The pump shaft is ceramic, and the static O-ring is available in EPDM or FKM (Viton).

Flow Rates: The maximum flow rate is 1.96 GPM (7.15 LPM) with a maximum head of 13.00 FT (5.63 PSI). Flow and pressure are dependent on input voltage.

Specifications: The maximum fluid temperature is 203°F (95°C), and the maximum system pressure is 75 psi. The pump weighs 10 oz (283.5 grams) and has ports of 1/2” MHB and 3/8” MPT.

Motor Specifications: The pump features an integrated, brushless DC motor with supply voltages of 12v BLDC or 24v BLDC, with an optional 0-5v third wire speed control. It is recommended to use a 5 amp fast-acting fuse for circuit overcurrent protection. The electronics have a maximum power of 18 watts.

Remote Speed Control: An optional feature that requires a third wire and a 0-5 volt DC signal for speed control.

Model Variants: The document lists several models (INTG1-040, INTG1-041, etc.) with specifications such as voltage, maximum amps, maximum flow, maximum head, and connection types. All models operate at 24 VDC with a 0-5v controller and have a maximum flow of 1.96 GPM (7.41 LPM) and a maximum head of 13.00 FT (5.63 PSI).

Testing and Performance: Testing was conducted in a controlled laboratory environment, and actual performance may vary by ±10% from the provided data.

Catalog excerpts

INTG1 Series A GORMAN-RUPP COMPANY Max. Fluid Temp: 203°F (95°C) Max Sys. Pressure: 75 psi Flow and pressure dependent on input voltage Materials in contact with solution Body: PPS (Ryton®) Impeller: PPS (Ryton®) Pump Shaft: Ceramic Bearing Plate: PPS (Ryton®) Housing: PPS (Ryton®) Rotor Shell: PPS (Ryton®) Static O-Ring: EPDM, FKM (Viton) Motor specifications Motor: Integrated, Brushless DC Supply Voltage: 12v BLDC or 24v BLDC w/ 0-5v third wire speed control (optional) Inrush Current: None. Ramps up to running current. The above curve is an all inclusive overview of the INTG1 Series catalog models represented on this tech sheet. Gorman-Rupp Industries designs and manufactures pumps and pumping solutions for the Original Equipment Manufacturer (OEM). All models shown can be configured to meet specific OEM application requirements. Contact GRI for design points that fall outside of shown parameters. It is recommended that the customer provide circuit over current protection to the pump. 5 amp fast acting fuse is recommended. Electronics Max Power: 18 watts. Remote Speed Control (Optional - Consult Factory) • Third Wire • 0-5 volts (Reference DC NEG). Speed is controlled by a nominal 0-5 volt DC signal. Mounting Base Variable 360° rotation Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown. 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI INTG1_INTG3_INTG7 Specifications_032315

Open the catalog to page 1

INTG1 Series A GORMAN-RUPP COMPANY BLUE 0-5V SPEED CONTROL WIRE Drawing represents model INTG1-040 with 1/2” MHB connectors and 3 wire driver. Connections Inlet/Outlet (Inches) O-Ring Material • Electronics Maximum power = 18 Watts. • 0-5v Controller requires third wire on driver. • Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown. 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI INTG1_INTG3_INTG7 Specifications_032315

Open the catalog to page 2

INTG1 Series Circulation Pumps

INTG1 Series Circulation Pumps

Catalog excerpts

All Gorman-Rupp Industries catalogs and technical brochures

Archived catalogs