INTG 3 Max Flow Per INTG3 Model Series Series Maximum System Pressure: 75 psi Approximate Weight: .8 LBS (362.9 grams) Ports: 1/2”, 3/4” MHB, 3/8” MPT / OEM Customization Available Materials In Contact With Solution Pump Shaft: Ceramic Motor: Integrated, Brushless DC (8.0)— Static O-Ring: EPDM, FKM Motor Specifications Total Head • FEET OF WATER • (METERS) Supply Voltage: • 12-24 VDC • 115, 230 VAC (auto sensing technology), Optional with OEM quantities. Electronics Maximum Power: 60 Watts To protect the control board, each Integrity Series pump will be issued with a Maximum Power limit (Watts). To stay within this limit, the recommended fuse size (Amps) will be based on the voltage supplied. (Watts = Voltage X Amps) Control Options • Direct Supply Voltage: Speed of the pump determined by the voltage supplied • Analog: 0-5v DC signal • Digital: PWM • Tachometer: Feedback option available Maximum Fluid Rating Chart 2.00 Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment. Controller Position Maximum Fluid Temp Rating Separate from pump Within pump’s housing Various factors influence the recommended maximum temperature rating. These factors play a role in determining the pump’s life and applied warranties. In some applications, a higher maximum fluid temperature rating may be warranted. Factors influencing maximum temperature rating include, but are not limited to: • Starting temperature of fluid in system • Ambient temperature • Required performance, application’s specifications • Run time Optional Agency Approvals UL778: Motor-Operated Water Pumps NSF 61: Potable Water NSF372: Lead Content Many GRI pumps are RoHS & REACH compliant. For declarations by specific model numbers, please contact GRI. IP (Ingress Protection) IP6X: No ingress of dust. IP66: No ingress of dust, protection against powerful water jets. IP67: No ingress of dust, protection against temporary water immersion. IP68: No ingress of dust, protection against continuous water immersi immersion.

INTG 3 3 GRIpumps.com INTG INTG3 Series Typical Dimensional Drawing. Many other OEM port options and configurations are available. Please contact GRI to discuss. Base Model Options MHB = Male Hose Barb, MPT = Male Pipe Thread, Tr = Transportation Neoprene Rubber Base Integrity Series Pumps are designed and manufactured specifically for OEM customization. If you don’t immediately find a pump that meets your exact requirements, our dedicated Pump Team is ready to work with you in developing a solution specific to your application. INTG3 SERIES MODELS EPDM O-Ring 2 wire: 3 wire: (+), (-), Speed...