INTG 3
2Pages

Catalog excerpts

Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment. Specifications Maximum System Pressure: 75 psi Approximate Weight: .8 LBS (362.9 grams) Ports: 1/2”, 3/4” MHB, 3/8” MPT / OEM Customization Available Optional Agency Approvals RoHS/REACH UL778: Motor-Operated Water Pumps NSF61: Potable Water NSF372: Lead Content Many GRI pumps are RoHS & REACH compliant. For declarations by specific model numbers, please contact GRI. IP (Ingress Protection) IP66: No ingress of dust, protection against powerful water jets. IP67: No ingress of dust, protection against temporary water immersion. IP68: No ingress of dust, protection against continuous water immersion.

Open the catalog to page 1

INTG 3 GRIpumps.com INTG 3 INTG3 Series Typical Dimensional Drawing. Many other OEM port options and configurations are available. Please contact GRI to discuss. Base Model Options MHB = Male Hose Barb, MPT = Male Pipe Thread, Tr = Transportation Neoprene Rubber Base INTG3 SERIES MODELS EPDM O-Ring Ports Inches 3-wire: Attaching a 0-5v DC or PWM input signal to the third wire gives the ability to adjust voltage and speed of the pump. If the third wire is not connected, the pump will run full-on. Connectors: MHB = Male Hose Barb; MPT = Male Pipe Thread | O-Ring Material: EPDM = Ethylene...

Open the catalog to page 2