INTG 1
2Pages

INTG 1 INTG1 Series •Maximum flow per voltage Voltage Maximum System Pressure: 50 psi Approximate Weight: .8 LBS (362.9 grams) Ports: 1/2” MHB, 3/8” MPT OEM Customization Available Materials In Contact With Solution Impeller Shaft: Stainless Steel or Ceramic Static O-Ring: EPDM, FKM Motor Specifications Supply Voltage: 12-24, 36 VDC Electronics Maximum Power: 18 Watts Total Head • PSI • (BAR) Total Head • FEET OF WATER • (METERS) Motor: Integrated, Brushless DC —(0.50) To protect the control board, each Integrity Series pump will be issued with a Maximum Power limit (Watts). To stay within this limit, the recommended fuse size (Amps) will be based on the voltage supplied. (Watts = Voltage X Amps) Control Options • Direct Supply Voltage: Speed of the pump determined by the voltage supplied • Analog: 0-5v DC signal • Tachometer: Feedback option available Maximum Fluid Rating Chart Controller Position Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment. Maximum Fluid Temp Rating Separate from pump Within pump’s housing Various factors influence the recommended maximum temperature rating. These factors play a role in determining the pump’s life and applied warranties. In some applications, a higher maximum fluid temperature rating may be warranted. Factors influencing maximum temperature rating include, but are not limited to: • Starting temperature of fluid in system • Ambient temperature • Required performance, application’s specifications • Run time Optional Agency Approvals UL778: Motor-Operated Water Pumps NSF 61: Potable Water (1/2” only) NSF 169: Food Grade NSF372: Lead Content (1/2” only) Many GRI pumps are RoHS & REACH compliant. For declarations by specific model numbers, please contact GRI. IP (Ingress Protection) IP6X: No ingress of dust. IP66: No ingress of dust, protection against powerful water jets. IP67: No ingress of dust, protection against temporary water immersion. IP68: No ingress of dust, protection against continuous water immersi immersion.

INTG1 Series Typical Dimensional Drawing. Many other OEM port options and configurations are available. Please contact GRI to discuss. Port Options Integrity Series Pumps are designed and manufactured specifically for OEM customization. If you don’t immediately find a pump that meets your exact requirements, our dedicated Pump Team is ready to work with you in developing a solution specific to your application. INTG1 SERIES MODELS EPDM O-Ring Ports Inches 3 wire:(+), (-), Speed Control 3 wire: (+), (-), Speed Control Connectors: MHB = Male Hose Barb; MPT = Male Pipe Thread | O-Ring...