Centrifugal Pumps Centrifugal pumps are designed to transfer both corrosive and non-corrosive fluids at maximum hydraulic efficiencies. Centrifugal pumps are not self-priming and must be used in applications where flooded suction exists. These pumps can not be run dry. Typical applications include commercial and residential heating and cooling systems, commercial coffee urns, ice makers, dish and glassware washers, laundry appliances, plating systems, agricultural sprayers and industrial floor scrubbers. Features: • Corrosion resistant • Hydraulically efficient • Quiet operation • No shaft seals • Flexible mounting and body discharge positions • Low current draw and heat rise • NSF certified models available Gorman-Rupp Industries designs and manufactures pumps and pumping solutions for the Original Equipment Manufacturer (OEM). All series/models shown can be configured to meet specific OEM application requirements. Contact GRI for design points that fall outside of shown parameters. SERIES Phenolic Noryl® Phenolic Polyethylene Phenolic Polypropylene MOTOR SPECS / VOLTAGES 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI

Specifications / OEM Options Centrifugal Pumps Centrifugal Pumps Overview Max Flow Rates: Range to 60 gpm Max Discharge Heads: Range to 85 Feet Max Fluid Temperature: To allow for optimum life, pumps with lip seals are limited to 180°F (82°C) and pumps with mechanical seals permit operation to 220°F (104°C) Motors: All motors are rated for continuous duty, thermally protected and UL recognized. Materials in Contact with Solution: Refer to individual series page. Contact GRI regarding chemical compatibility. OEM Options: GRI’s goal is to meet an OEM’s unique requirements. Our Sales and Engineering...

Centrifugal Pumps Seals continued from previous page • Carbon vs. 316 Stainless Steel with Kel-F®, Viton®/ Fluoroelastomer, Brass and 302 Stainless Steel components • Carbon vs. 316 Stainless Steel with Polyethylene, Brass and 302 Stainless Steel components • Carbon vs. 316 Stainless Steel with Silicone, Brass and 302 Stainless Steel components • EPT/EPDM • Viton®/Fluoroelastomer O-Rings (Elastomers) • Flurosilicone (14110 & 14518/20 Series only) • Hypalon® • Kel-F® • Nitrile • Neoprene • Silicone • Viton®/Fluoroelastomer Mechanical Seal Model 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001...

Centrifugal Pumps Specifications Max Flow: 9 gpm Max Head: 11 ft Max Fluid Temp. 220°F (104°C) Materials in contact with solution / OEM options Body Phenolic Suction I.D. - 1⁄2” Discharge I.D. - 1⁄2” Impeller Phenolic Seal Carbon and Ceramic faces with Nitrile elastomers. Mechanical type seal. Motor specifications / OEM options Motor Specs • 115V, 50/60 hz • 230V, 50/60 hz • Open • Shaded pole • Thermally protected • Ball bearing TOTAL HEAD - FEET TOTAL HEAD - METERS U.S. GALLONS PER MINUTE A - 60 Hz curve. B - 50 Hz curve. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment....

Centrifugal Pumps Typical Dimensions C DISCHARGE L Dimensions in Inches (Dimensions in Millimeters) 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Centrifugal Pumps Overview 0821

Centrifugal Pumps TOTAL HEAD - METERS TOTAL HEAD - FEET Specifications Max Flow: 40 gpm Max Head: 50 ft Max Fluid Temp. 220°F (104°C) Materials in contact with solution / OEM options Body Noryl® Suction I.D. 15/16” Discharge I.D. 13/16” Impeller Noryl® Seal Carbon and Ceramic faces with Neoprene® and Nitrile elastomers Motor specifications / OEM options Motor Specs • 115/230V, 50/60 Hz, 1⁄3 hp • Open • Drip-proof • Capacitor start • Continuous duty rated • Thermally protected U.S. GALLONS PER MINUTE A - 60 Hz curve. B - 50 Hz curve. Do Not Run Pumps Dry. Pumps must be in a continuous flooded...

Centrifugal Pumps Dimensions in Inches (Dimensions in Millimeters) 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Centrifugal Pumps Overview 0821

Centrifugal Pumps Specifications Max Flow: 31 gpm Max Head: 32 ft Max Fluid Temp. 220°F (104°C) Materials in contact with solution / OEM options Body Phenolic TOTAL HEAD - METERS Noryl Carbon and Ceramic faces with EPT/EPDM elastomers and 304 Stainless Steel and 18-8 Stainless Steel springs Motor specifications / OEM options Motor Specs • 115V, 50/60 Hz; • Thermally protected • PSC • Ventilated ® TOTAL HEAD - FEET Impeller Seal U.S. GALLONS PER MINUTE A - 60 Hz curve. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment. Model Number Motor Type 180 Hines Ave. • Bellville,...

Centrifugal Pumps Dimensions in Inches (Dimensions in Millimeters) 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Centrifugal Pumps Overview 0821

Centrifugal Pumps Specifications Max Flow: 13 gpm Max Head: 9.7 ft Max Fluid Temp. 180°F (82°C) Materials in contact with solution / OEM options Body Polyethylene TOTAL HEAD - METERS Impeller Polyethylene Seal Nitrile lip seal Motor specifications / OEM options Motor Specs • 115V, 60 hz • Open • Shaded pole TOTAL HEAD - FEET U.S. GALLONS PER MINUTE A - 60 Hz curve. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment. Model Number Motor Type Shaded Pole Same as 15901-001 except with 6’ cord and cover. 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338...

Centrifugal Pumps Typical Dimensions C DISCHARGE L Dimensions in Inches (Dimensions in Millimeters) 180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com GRI Centrifugal Pumps Overview 0821