LEDI® 7.S Hospital Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation. Time setting The professional LEDI ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual. Display date and time alternately. Backup of time information in case of mains absence, by lithium battery : 10 years. Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Clock case in anodised aluminium : IP66 waterproof ( after flush mounting and gasket setting). Toughened Mineral glass antibacterial front panel. Flush mount timer with white Makrolon front face. Its participation in the sustainable development life span over 20 years. 2 years warranty. Remote management (with NTP synchronization) Internal time base The LEDI ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss. CLOCK : 230 VAC/50-60 Hz 115 VAC/50-60 Hz Power supply Low voltage 12, 24 or 48 VDC NTP Version : POE (Power Over Ethernet) Certifications CE, EN 60950, EN 55022, EN 55024, ROHS. Maximum 15,06 VA consumption IP 66 (after flush mounting) MTBF 56 225 h. display : 5 min. CPU : 5 min. MTTR Power supply : 5 min. Weight 2.9 kg 490x184x66 mm (LxHxD) Dimension Flush mount wall opening : 440x170 mm Digit Height Hour/minute : 70 mm Seconds : 50 mm Maximal distance 35 meters of legibility Operating -20° to 50°C temperature Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7). Synchronization inputs • • • • • • • • • • • Standalone TCXO quartz time base. DCF(EUROPE). GPS. Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses. AFNOR NFS 87500 IRIG B : shall be specified on Purchase order. ASCII RS232, ASCII RS422/485. NTP Ethernet 10/100BaseT automatic detection :RJ45. NTP POE (Power Over Ethernet). SMPTE. Wi-Fi (IEEE 802.11 a/b/g/n standard) TIMER CASE : Front face Case Dimension IP Timer function Makrolon treatment Enamelling in white Flush mount, with 4m cable, disconnectable 142x80mm – distance between two holes : 122mm 66 (after flush mounting) Touch/ sensor – Function : start/stop, up/down Display / LED specifications Simple row LED display. SMD Technology, Viewing Angle: 160°. bi-colored LED (red green) monochrome LED Red : 245 mcd Blue : 625 mcd Yellow Green : 780 mcd White : 625 mcd Ref : BDR_UK2-8_LEDI-and-multizone-clocks-V6.0-priceless All technical changes, aesthetic, colour

LEDI® 7.S Hospital ITEM CODE N366 VERSION Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C) DCF Radiosynchronization. Antenna + 4m of cable GPS Antenna + 10m of cable 24V reversed parallel minute pulses receiver clock Minute 60V receiver Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt AFNOR NFS 87500* receiver clock SMPTE-EBU receiver clock ASCII RS 232 receiver clock ASCII 422/485 receiver clock NTP Ethernet 10/100 base T Synchronization Wi-Fi (IEEE 802.11 a/b/g/n standard) *IRIG.B Version :...