Performance Jib and Gantry Cranes
16Pages

1/4 to 5 tonsUp to 30' Manual or Motorized Free Standing, Wall Mounted or GantryCAPACITIES:SPANS:ROTATION:STYLES: >

WORK STATION JIB CRANES > Work Station Jib Cranes are the ideal substitute for traditional, heavy I-Beam Jib Cranes. These jibs aredesigned to service circular areas and support toolbalancers, air balancers, vacuum lifters and hoists. When column or wall mounted, they can handle upto a 200 rotation. When floor mounted, they canaccommodate up to a 360 rotation. Capacities are available from 100 lbs. to 1000 lbs. with spans upto 16 ft. Tapered roller pivot bearings and trunnion rollers forease of rotation.Օ Enclosed track boom that virtually eliminates dirt and dust. High-strength,...

ARTICULATING JIB CRANES This versatile crane can move loads around corners, reach into machines or doorways, and swing under obstructions. This crane is also perfect in applications that require an operator to rotate the jib in close to its pivot point. Capacities from 150 lbs. to 2000 lbs. with spans up to 16 ft. 1 Industrys Best Warranty > 6 3 Ease of Operation ҕ 5 years on Manual Cranes 2 years on Motorized Cranes This helps reduce injuries and increase productivity. IndustryՒs Best Delivery Local Representation 5-Day Shipments are available for allmanually operated cranes in this...

The Retrofit Traction Drive kit will fit all Free Standing > J ibs with box-stylehead assemblies no matter who made your jib crane. The modular drive assembly bolts to the back of the box-style head assembly. The drive powers large, heavy-walled rollers. The drive roller is easily adjusted to ensure a constant driving force. This is a great way to upgrade an existing Free Standing Jib Crane with motorized power making the Retrofit Kit a great, cost-effective way to solve workers compensation or safety problems. Retrofit Traction Drive kits are available for indoor applications up to 5 ton...

THE ECONOMICAL SOLUTION > The Wall Bracket (WB100) Jib is the most economical means of providinghoist coverage for individual use in bays, along walls or columns of plants, or as a supplement to an overhead crane or monorail system. Two key requirements must be met before applying the Wall Bracket Series: 1) A structurally adequate wall or column to support the jib must exist. 2) Sufficient clearance above the boom throughout its arc to accommodate the tie rod suspension must exist. EASE OF MOVEMENT > Low dead weight of the boom combined with bronze bushings and oil-impregnated bronze...

Model Number Explanation: Example: 3 Ton WB100-G3-20-12c8: 3 Ton = 6,000 pound capacity, WB100 = wall bracket style, 20 = span (A), 12 = boom depth in inches (W), c8 = 8" cap channel welded to top of boom. Other Sizes & Capacities Other spans and capacities are available by contacting your local Gorbel Dealer. Dimensions are subject to change without notice. >

The Wall Cantilever (WC200) provides hoist coverage and 200˚rotation for individual use in bays, along walls or columns ofplants, or as a supplement to an overhead crane or monorailsystem. This jib has the advantage of providing maximum lift for the hoist, since it can be installed very close to the underside ofthe lowest ceiling obstruction.Two key requirements must be met before applying the Wall Cantilever Series:1) A structurally adequate wall or column to support the jib must exist.2) Sufficient clearance above the boom throughout its arc must exist. EASE OF MOVEMENT > The fittings...

Model Number Explanation: Example : 1 Ton WC200-B1-12-10; 1 Ton = 2,000 pound capacity, WC200 = Wall Cantilever style, 12 = span (A), 10 = boom depth in inches (W). Other Sizes and Capacities Other spans and capacities are available by contacting your local Gorbel Dealer. Dimensions are subject to change without notice. >

THE ECONOMICAL 360˚ SOLUTION > The MT Series Crane is floor supported, top stabilized, and is capable of360˚ rotation via a top and bottom bearing assembly. Three key requirements must be met before deciding on a Mast Type Jib Crane: 1. An adequate structural support to stabilize the crane at the top of the mast must exist. If the jib is installed underneath an overhead crane runway or building truss, then the deflection of the supporting member may not exceed 1/2 inch.2. Clearance overhead for the pivot assembly must exist.3. Clearance overhead for the boom to rotate must exist. AVAILABLE...

All Gantry Cranes shown above, the Tread (E) dimension is 78" between caster pivot centers. Polyurethane 6"diameter steel casters are standard. > Example: FG-1-12-8; FG = Fixed Gantry Crane, 1 = 1 Ton (2,000 pound) capacity, 12 = Height Under Beam (B) in feet, 8 = Overall Span (A) in feet. Specifications subject to change without notice. Available in capacities to 5 ton and spans to 30 feet. Special capacities, heights, casters and spans are available. Price on request. > Model Number Explanation: >

FREE STANDING WORK STATION BRIDGE CRANES & MONORAILS CEILING MOUNTED WORK STATION BRIDGE CRANES & MONORAILS Up to 4000 lbsUp to 30' Steel, Aluminum & Stainless Steel Average 28% IncreaseCAPACITIES:SPANS:ENCLOSED TRACKS:PRODUCTIVITY: Up to 4000 lbsUp to 30'Steel, Aluminum & Stainless SteelAverage 28% increaseCAPACITIES:SPANS:ENCLOSED TRACKS:PRODUCTIVITY: FREE STANDINGCEILING MOUNTED ERGONOMIC STUDY > G-FORCE > EASY ARM > ٙ ERGONOMIC STUDY > PERFORMANCE JIB CRANES GANTRY CRANES WORK STATION JIB CRANES ARTICULATING WORK STATION JIB CRANES 1/4 to 5 tons Up to 30'Manual or MotorizedFree...