Product Brochure - GE Series Motion Controllers
13Pages

w Cost rlign rrecision Low Cost High Precision Googol Technology (HK) Limited Control & network factories of the future Room 3639, Annex Building, HKUST, Clear Water Bay, Kowloon, Hong Kong GE series catalog 170305.doc Copyright 2005 Googol Technology (HK) Ltd All Right reserved

Company profile Googol Technology (HK) Limited was founded in 1999 by a group of renowned experts, academics and professionals in motion control, manufacturing automation and microelectronics. As the first high-tech company in Asia Pacific region specializing in motion controllers and controller based systems, Googol Technology offers a range of standard and highly customized motion controllers, PA-based control systems as well as automation and mechatronics products. Regional application engineering expertise, strong support, cost effectiveness, and high performance set Googol Technology...

Motion Control Technology –“Way of Building Machinery”-Motion controller is developed on the basis of a high-performance digital signal processor (DSP) and field-programmable gate array (FPGA). The PC-based, open-architecture motion controller is now the most powerful motion controller that has been widely used in automation applications worldwide. Simply put, a motion controller is a device to control, in real time, the position and velocity of an actuator, such that the moving parts to complete a motion according to the preset trajectory and given motion parameters. Depending on the...

Motion Control Card Selection Guide GX – X00 – XX – XXX – X G: General terminal board A: Terminal board with 8-channel A/D converter R: Terminal board with Darlington output ISA: ISA bus PCI: PCI bus SV: servomotor or stepper motor, analog voltage or pulse output, closed-loop or open loop control SG: stepper motor or servomotor, pulse output, open loop control SP: SG sub-series, encoder input channel for each axis SG-S: stepper motor or servomotor, pulse output, open loop, encoder input channel for each axis, programmable duty cycle of the fourth axis PG: for Point-to-point control, pulse...

GE Series ordering Information GE series Model List: Model Number 8/4/2 axes of encoder input encoder input, 1 channels of auxiliary encoder encoder input, 1 Pulse channels of auxiliary encoder Standard Accessories •

GE Series Function List Included Sampling period Programmable (Default 200us, GE-800 default 400us) Analog output Pulse output Programmable duty ratio Encoder channel 1 channels of quadrature incremental encoder. Max. Counting frequency: 8MHz Limit switch Left and right limit switch of each axis Home switch Home switch of each axis Driver alarm signal 1 channel of driver alarm signal of each axis Driver activation signal 1 channel driver activation signal of each axis Driver reset signal 1 channel driver reset of each axis Uncommitted digital frequency: 8MHz (SD, SG-S Max. 4MHz) Auxiliary...

GE-300 Series Motion Controller GE-300 series motion controllers developed by Googol Technology are economical type 3-axis DSP-based motion controllers, which are designed for such motion control equipments that adopt continuous trajectory motion mode. The velocity invariableness and transition smoothness between any two-trajectory segments during the continuous trajectory motion are their most remarkable advantages, and therefore the smoothness of the machining surface and machining precision can be greatly improved. The series contains GE-300-SV and GE-300-SG, being widely used in highly...

Googol Technology (HK) Ltd. Bus Type: • Encoder signal counting rate up to 4MHz • Flexible combination of analog voltage output and pulse output mode (Only for SV card) Analog Input (Optional): • GE motion controller + embedded system. • 8 channels of independent 12-bit +10V analog • Stand-alone through standard network interface (Optional) Uncommitted Digital Input/Output: System Software: • 16 channels of uncommitted opto-isolated • Demo software of engraving machine digital input • Demo software in Windows environment • 16 channels of uncommitted opto-isolated • Windows 98/2000/NT...

Googol Technology (HK) Limited GE-800-PV Motion Controller GE-800-PV motion controllers developed by Googol Technology Ltd is a low cost 8-axis DSP based motion controller, specially designed for point-to-point motion control. Owing to its capability of perfect positioning and velocity profile curves, it is used for quick and accurate positioning applications, and suitable for the equipments that adopt high-speed and high-precision point-to-point motion modes, such as PCB drilling machine, SMT, Bonding machine, etc. Main Features: • Adopt high-performance DSP and FPGA technology. Each card...

Googol Technology (HK) Limited • positions of three encoder and auxiliary encoder simultaneously • C/C++ function library and Example source code in DOS. Power Consumption: 1 channel of home capture signal for each axis and 1 channel Index capture signal +5V, Icc=2A, power supplied from PC ±12V, Icc=60mA, power supplied from PC provided by user Environment: non-condensing Mechanical Dimension: System Software: • Stand-alone through standard network interface (Optional) Demo software in Windows environment Windows 98/2000/NT equipment drivers, extended DLL Basic Accessories: •

Googol Technology (HK) Limited Application Samples Engraving Machine Laser Engraving Machine

Googol Technology (HK) Limited Company Contacts Googol Technology (HK) Limited Address : Room 3639, Annex Building, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong Email : sales @googoltech,com (Products Enquiry) / info @ googoltechxom (General Enquiry) Enquiries from Mainland China: Googol Technology (SZ) Limited Address : 2nd Floor, West Wing, IER Building (PKU-HKUST Shenzhen Hong Kong Institution) High-tech Industrial Park, Nanshan, Shenzhen, PRC. Email : googol® googoltechxom Website : http ://ww w, googoltechxom, cn International Distributors Address...