Low Cost High Precision Googol Technology (HK) LimitedControl & network factories of the future m m % m m * m m m «■ a * * m m * §3539 m Room 3639, Annex Building, HKUST, Clear Water Bay, Kowloon, Hong Kong Tel.: (852) 2358 1033, (852) 2719 8310; Fax: (852) 2719 8399; Copyright 2005 Googol Technology (HK) Ltd All Right reserved

Googol Technology (HK) Limited was founded in 1999 by a group of renowned experts, academics and professionals in motion control, manufacturing automation and microelectronics. As the first high-tech company in Asia Pacific region specializing in motion controllers and controller based systems, Googol Technology offers a range of standard and highly customized motion controllers, PA-based control systems as well as automation and mechatronics products. Regional application engineering expertise, strong support, cost effectiveness, and high performance set Googol Technology apart from all others....

Motion Control Technology –“Way of Building Machinery”-Motion controller is developed on the basis of a high-performance digital signal processor (DSP) and field-programmable gate array (FPGA). The PC-based, open-architecture motion controller is now the most powerful motion controller that has been widely used in automation applications worldwide. Simply put, a motion controller is a device to control, in real time, the position and velocity of an actuator, such that the moving parts to complete a motion according to the preset trajectory and given motion parameters. Depending on the characteristics...

Motion Control Card Selection Guide GX – X00 – XX – XXX – X G: General terminal board A: Terminal board with 8-channel A/D converter R: Terminal board with Darlington output ISA: ISA bus PCI: PCI bus SV: servomotor or stepper motor, analog voltage or pulse output, closed-loop or open loop control SG: stepper motor or servomotor, pulse output, open loop control SP: SG sub-series, encoder input channel for each axis SG-S: stepper motor or servomotor, pulse output, open loop, encoder input channel for each axis, programmable duty cycle of the fourth axis PG: for Point-to-point control, pulse output...

Standard Accessories • ACC1 interconnect board • ACC2 terminal board • ACC3 1.5m 62-pin shielded cable (x2) • ACC4 60-pin flat cable Copyright 2005 Googol Technology (HK) Ltd All Right reserved

Copyright 2005 Googol Technology (HK) Ltd All Right reserved

GE-300 series motion controllers developed by Googol Technology are economical type 3-axis DSP-based motion controllers, which are designed for such motion control equipments that adopt continuous trajectory motion mode. The velocity invariableness and transition smoothness between any two-trajectory segments during the continuous trajectory motion are their most remarkable advantages, and therefore the smoothness of the machining surface and machining precision can be greatly improved. The series contains GE-300-SV and GE-300-SG, being widely used in highly complicated profile motion control...

• Encoder signal counting rate up to 4MHz • Flexible combination of analog voltage output and pulse output mode (Only for SV card) Analog Input (Optional): • 8 channels of independent 12-bit +10V analog input Uncommitted Digital Input/Output: • 16 channels of uncommitted opto-isolated digital input • 16 channels of uncommitted opto-isolated digital output Dedicated Digital Input/Output: • Dedicated opto-isolated input per axis, 2 channels for limit switch signal, 1 channel for home signal, and 1 channel for drive alarm signal input • Dedicated opto-isolated output per axis, 1 channel for drive...

Googol Technology (HK) Limited Uncommitted Digital Input/Output: • 16 channels of uncommitted opto-isolated digital input • 16 channels of uncommitted opto-isolated digital output Dedicated Digital Input/Output: • Dedicated opto-isolated input per axis, 2 channels for limit switch signal, 1 channel for home signal, and 1 channel for drive alarm signal input • Dedicated opto-isolated output per axis, 1 channel for drive activation signal and 1 channel for drive alarm signal reset Position Capture: • 1 channel of probe input can capture the GE-800-PV motion controllers developed by Googol...

Googol Technology (HK) Limited positions of three encoder and auxiliary encoder simultaneously • 1 channel of home capture signal for each axis and 1 channel Index capture signal for each axis Bus Type: • Standard PCI/ISA/PC104 bus • GE motion controller + PC • GE motion controller + embedded system. • Stand-alone through standard network interface (Optional) System Software: • Demo software in Windows environment • Windows 98/2000/NT equipment drivers, extended DLL Basic Accessories: • ACC1 interconnect board • ACC2 terminal board • C/C++ function library and Example source code...

Googol Technology (HK) Limited Application Samples Engraving Machine Laser Engraving Machine

Googol Technology (HK) Limited Googol Technology (HK) Limited Address : Room 3639, Annex Building, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong Telephone : (852) 2358 1033 Email : [email protected] (Products Enquiry) / info @ googoltech.com (General Enquiry) Googol Technology (SZ) Limited Address : 2nd Floor, West Wing, IER Building (PKU-HKUST Shenzhen Hong Kong Institution) High-tech Industrial Park, Nanshan, Shenzhen, PRC. Postal Code : 518057 Email : [email protected] Website : http://www. googoltech.com.cn...