Overview GE series motion controllers developed by Googol Technology are economical type DSP-based motion controllers, which are especially designed for such motion control equipments that adopt continuous trajectory motion mode. The velocity invariableness and transition smoothness between any two-trajectory segments during the continuous trajectory motion are their most remarkable advantages, and therefore the smoothness of the machining surface and machining precision can be greatly improved. The GE- series contains 2-4 axis, with types of continuous trajectory function as well as point-to-point motion control function, being widely used in highly complicated profile motion control equipments, such as engraving machines, laser cutting machine, laser welding machine, rapid prototyping machine, ultrasonic welding machine, water jet cutter, PCB milling machine, and wafer cutting machine, etc. Main Features: • Adopt high-performance DSP and FPGA technology. • Coordinated motion up to 4 axes, Continuous interpolation function (for SV and SG mode). • Control period: 200us. • Modes of motion: linear interpolation, circular interpolation, and manual pulse generator function. • Pulse output frequency for interpolation steadily up to 256KHZ. • Radial error of circular interpolation less than + 0.5pulse. • Programmable management for alarm signal and limit switch signal • On-board memory buffer (up to 8k). • Programmable coordination offset. • PID (Proportion-Integral-Differential) digital filter with velocity and acceleration feed forward, and with integral limit and bias compensation and low-pass filter (Only for SV card). • Look-ahead function. • Programmable start velocity and maximum velocity. • Programmable velocity override during motion. • Network communication port (Ethernet, Profibus-DP, RS232, RS422/485) (Optional function). Technical Specifications Axis Channels: • Up to 4 channels of 16-bit analog voltage output signal (Only for SV card) or pulse signal with a frequency up to 256KHz, 4 channels of quadrate incremental encoder input (3 channels for axis feedback signal input, 1 channel for the auxiliary encoder input) • Encoder signal counting rate up to 4MHz • Flexible combination of analog voltage output and pulse output mode (Only for SV card)

Googol Technology (HK) Ltd. Analog Input (Optional): • 8 channels of independent 12-bit +10V analog input Uncommitted Digital Input/Output: • 16 channels of uncommitted opto-isolated digital input • 16 channels of uncommitted opto-isolated digital output Dedicated Digital Input/Output: • Dedicated opto-isolated input per axis, 2 channels for limit switch signal, 1 channel for home signal, and 1 channel for drive alarm signal input • Dedicated opto-isolated output per axis, 1 channel for drive activation signal and 1 channel for drive alarm signal reset Position Capture: • 1 channel...

Ordering Information Model No. GE-X00-SV/SG/PV /PG-PCI/ISA ACC1 & ACC2 Interconnect board with a 60-pin flat cable Motion control card Terminal board Control software for Windows 98/2000/NT, extended DLL; function library, etc. Control Software Application Samples Engraving Mchine Laser Engraving Machine