Texture/Cure Machines
8Pages

Versatility is provided with GOMACO’s texturing/curing machines. The T/C-600 accomplishes tasks quickly because of its optional high travel speed. The 176 fpm (53.6 mpm) is the fastest in the industry. Both the T/C-600 and T/C-400 frames permit width adjustment from 12 ft. 10 in. (3.91 m) up to 56 ft. 10 in. (17.32 m). The T/C-600 is equipped with two hydraulically powered, gear-driven crawler tracks and the T/C-400 is equipped with two end cars, each having two hydraulically powered, foam-filled rubber flotation tires. The Worldwide Leader in Concrete Paving Technology

Versatility With One Machine... • Versatility with one machine...texturing, curing, poly-roll, burlap/astroturf drag. • T/C-600 accomplishes the tasks quickly because of its optional high travel speed. The 176 fpm (53.6 mpm) is the fastest in the industry. This can allow your operator to keep up with the paving operation and time to tend to other responsibilities. • The low-range power on the T/C-600 provides tractive effort around and over job-site obstacles and ease in negotiating inclines during loading. The low-range speed provides up to 66 fpm (20.1 mpm). • The T/C-600 and T/C-400...

GOMACO’s T/C-400 and T/C-600 texture/cure machines are now available with a skewed tining option. It allows the travel of the tining bars to run a skewed path, while the frame of the machine is square to the slab. It simplifies the ability to transverse tine on newly paved streets and highways requiring a skew texture. In the past, the frame of the texture/cure machine had to be skewed and incorporated the use of a secondary crawler track mount with a center pivot, which added length to the machine. The skewed frame had to be broken down for transport. These graphics help illustrate the...

Wire tines for texturing Longitudinal tining Versatility with the burlap/astroturf drag or poly-roll 4

Control box is strategically positioned to provide easy steering control and safety with the emergency stop switch. Console and operator station provides easy operation and overall visibility Full-width spray bar for curing Transverse cure system 5

T/C-600 Dimensions Equipped with two hydraulically powered, gear-driven crawler tracks. 9 ft. 10.26 in. (3 m) Minimum Transport Height T/C-600 engineering drawings show the frame set-up at the standard 32 ft. 10 in. (10 m). 11 ft. 10.32 in. (3.61 m) Minimum Transport Width Poly-roll

T/C-400 Dimensions Equipped with two end cars, each having two hydraulically powered, foam-filled rubber flotation tires. 10 ft. 7.35 in. (3.23 m) Minimum Transport Height T/C-400 engineering drawings show the frame set-up at the standard 32 ft. 10 in. (10 m). 10 ft. 8.65 in. (3.27 m) Minimum Transport Width

ENGINE Type: CAT diesel. Power: 60 hp (44.8 kW) @ 2800 rpm. SERVICE CAPACITIES Fuel reservoir: 33 gal. (124.9 L). Hydraulic oil reservoir: 57 gal. (215.8 L). HYDRAULIC SYSTEM Pumps: One double-stage main pump provides 37 gpm (140 Lpm) @ 2150 rpm. One main lift pump provides 11 gpm (41.6 Lpm) @ 2150 rpm. Oil cooler: One electric fan forced-air oil cooler mounted on top of engine shroud. Filtration: One twenty-five micron main filter. AUTOMATIC CONTROL SYSTEM Type: Electronic-over-hydraulic. Controls: GOMACO's control system features forward and reverse steering and grade control and is...