Typical Mold Profiles HIGH-PRODUCTION SLIPFORM PAVER, USING THE PATENTED, SIMULTANEOUS TRIM/POUR CONCEPT The GOMACO GT-6000. available in two models, provides built-in versatility for handling a variety of slipform paving projects. Excellent job-to-job mobility by means of a standard trailer and a pick-up. Simultaneous trim/pour concept assures virtually 100 percent concrete yield in a single-pass operation with operating speeds up to 32 fpm (9.75 mpm). Model GT-6000-78 has a trimming width of 78 in. (1981 mm) with paving widths up to 4 ft. (1.22 m) and model GT-6000-90 has a trimming width of 90 in. (2286 mm) with paving widths up to 5 ft. (1.52 m). Capable of trimming and pouring 25 ft. Two crawler tracks provide durability and high performance. Internal trimmerhead drive minimizes side clearance, permits trimming lo within 3 in. (76 mm) of obstacles to a tolerance within one-eighth inch (3 mm) to grade. Automated single-point electronic sensoring system controls grade, steering and cross slope. Capable of accommodating a sidemounted mold for specific job conditions. Molds are quickly interchangeable. Ideal for shpforming curb and gutter, sidewalk, recreational trail and small irrigation canal.

BOTH MODELS Type: Cummins diesel. SERVICE CAPACITIES HYDRAULIC SYSTEM Pumps: One double-stage and one single-stage main pump provide lifi-conlroi pump provides 11 gpm (41.6 Lpm). Filtration: Industry standard filtration, including two micron control-circuit filters, and 100 wire mesh lift-circuit strainers and suction sump strainers. Type: Three hydraulic vibrator circuits and controls. GT-6000-78, two hydraulic vibrators; GT-6000-90. three hydraulic vibrators. Curb and gutter mold: One mold standard, up lo 36 in. (914 mm) wide. Optional molds available, AUTOMATIC CONTROL SYSTEM Type: Electronic-over-Hydraulic....