GOMACO Full Line Brochure
40Pages

{{requestButtons}}

Catalog excerpts

GOMACO Full Line Brochure - 1

Placer/ Spreader Rubber-Tracked Placer Commander IIIx Curb Cadet Bridge Deck/ Flat Slab Finishers

Open the catalog to page 1
GOMACO Full Line Brochure - 3

The Worldwide Leader in Concrete Paving Technology GOMACO Corporation’s manufacturing plant #2 in Ida Grove, Iowa, USA. GOMACO Corporation was founded by Harold and Gary Godbersen, and began selling equipment in 1965 in Ida Grove, Iowa, USA. The company manufactured and marketed three original products for finishing bridge decks, the RC-120 side discharge conveyor, F-500 double oscillating screed finisher (USA patent number 3,299,786) and the Spanit® Work Bridge. GOMACO is an acronym for Godbersen Manufacturing Company, and has grown over the last 50 years to currently employ approximately...

Open the catalog to page 3
GOMACO Full Line Brochure - 4

GOMACO’s GHP-2800 four-track slipform paver with the G+ control system. It is now the technology that pulls everything together… G+ is the center that Connects all of the resources. Once you experience G+ controls, you won’t be satisfied with anything else. It’s a control system that is both easy to learn and easy to operate. G+ expresses itself in easy to understand international icons and full script explanations. It operates in all the major languages of the world and in the imperial or the metric system. It has a lightning-fast processing speed and features two-way communications...

Open the catalog to page 4
GOMACO Full Line Brochure - 5

jog buttons, located above the display screen, are used to manually change the steer direction of the tracks when the control loop is in manual mode. Control dials are used for manual steering and travel. The G+ travel dial turns to adjust travel speed in one percent increments, and ramps up or down with smooth, precise speed control. This feature is ideal for controlling the smooth travel speed necessary for slipform paving. The paver can be turned left or right with the G+ steering dial as it is moved in the manual travel mode. A flat-panel 6.5 inch (165 mm) anti-glare display screen is...

Open the catalog to page 5
GOMACO Full Line Brochure - 6

High-volume trimming and placing machine. Sectionalized trimmer widths up to 18.7 feet (5.7 m). Front-mounted trimmer allows for trimming to the end of each pass or within millimeters of front obstacles. Designed for easy removal of trimmerheads for transport. Sidemounted trimmer available for shoulder work. 35 foot (10.67 m) long rear conveyor has 160 degrees of hydraulic swing and hydraulic height adjustment up to 16.2 feet (4.94 m). Optional hydraulic front lifting arms, for ease in loading and unloading of trimmerheads. Placer receiving hopper, 11.9 feet (3.63 m) wide and capacity of...

Open the catalog to page 6
GOMACO Full Line Brochure - 7

Versatile trimming and placing machine. Sectionalized trimmer widths up to 14.7 feet (4.48 m). Front-mounted trimmer allows for trimming to the end of each pass or within millimeters of front obstacles. Designed for easy removal of trimmerheads for transport. Sidemounted trimmer available for shoulder work. 25.6 foot (7.8 m) long rear conveyor has 120 degrees of hydraulic swing and hydraulic height adjustment up to 13 feet (3.96 m). Optional hydraulic front lifting arms, for ease in loading and unloading of trimmerheads. Placer receiving hopper, 11.9 feet (3.63 m) wide and capacity of 1.47...

Open the catalog to page 7
GOMACO Full Line Brochure - 8

• High-production trimmer capable of widths up to 11 feet (3.4 m). • Features the same framework as the Commander III curb and gutter model, but with minor modifications. • Equipped with the most powerful trimmer ever put on a Commander III. • Capable of trimming flat or monolithic sidewalk and curb and gutter profiles. • Trimmerhead has three air shocks to keep it stable during the trimming process. • Telescoping right front leg is switched to a pivoting arm for zero trimmerhead clearance on both sides.

Open the catalog to page 8
GOMACO Full Line Brochure - 9

A trimmer for narrower-width, zero-clearance flat or monolithic sidewalk and curb and gutter up to eight feet (2.4 m) wide. Three-track design features All-Track Steering for easy maneuverability between obstacles, getting on/off stringline, and loading/unloading the machine. Hydraulically-controlled front gate on trimmerhead can be raised to trim through windrowed material or lowered for standard trimming. A 15 foot (4.6 m) long, 15 inch (381 mm) wide transfer conveyor and a 19 foot (5.8 ft) long, 20 inch (508 mm) wide discharge conveyor move the trimmed material. Discharge conveyor folds...

Open the catalog to page 9
GOMACO Full Line Brochure - 10

High-volume placer with high-speed mobility. The auger-style receiving hopper is 10.75 feet (3.28 m) wide and working capacity is 4.75 cubic yards (3.63 m3). Equipped with pivoting roller or quick-hitch for truck pusher. Hopper features 12 inch (305 mm) hydraulic vertical adjustment to allow for gate height on end dump trucks. Shaft-mounted eccentric vibrators provide vibration for emptying the hopper after each load and increased flowability. 36 inch (914 mm) wide transfer conveyor moves material quickly to the rear placing conveyor at speeds up to 608 feet per minute (185 mpm). 35 foot...

Open the catalog to page 10
GOMACO Full Line Brochure - 11

• Two-track machine designed to place and spread materials from 12 feet (3.66 m) up to 32 feet (9.75 m). • Unique frame hydraulically telescopes on left side up to 6.5 feet (1.98 m). • Hinged belt hydraulically raises in eight seconds and lowers in six seconds. • Belt can be mounted to the right or left side of the placer, and accommodates both end dump trucks and ready-mix trucks. • Hydraulic conveyor deflector directs the flow of concrete at discharge end of conveyor. • The auger system provides the final spreading with a reversible, hydraulically powered 20 inch (508 mm) diameter split...

Open the catalog to page 11
GOMACO Full Line Brochure - 12

Up to 50 feet (15.24 m) wide paving. Two-track or four-track slipform paver. Frame hydraulically telescopes on the left side up to 3.5 feet (1.07 m) to accommodate variable width paving. Exclusive “smart” steering cylinders, used for dependable steering control feedback for push-button steering setup, and setting parameters. T-Beam mounting rail for accurate and quick mold positioning, quick mounting, and removal of the mold. Unique counter-rotation programming allows the paver to turn 360 degrees within its own dimensions, providing excellent job-site

Open the catalog to page 12

All GOMACO International catalogs and technical brochures

  1. GRD

    4 Pages

  2. T/C-5600

    4 Pages

  3. GP-4000

    28 Pages

  4. GP-2600

    16 Pages

  5. GP-2400

    12 Pages

  6. GT 3200

    8 Pages

  7. GT 3600

    24 Pages

  8. G+ ConnectTM

    3 Pages

  9. Commander II

    8 Pages

  10. rail tunnel

    12 Pages

  11. GT-3200

    12 Pages

  12. GT-3400

    16 Pages

  13. GT-3600

    24 Pages

  14. Commander III

    28 Pages