Catalogs >
Goldstone Orient New Material Technology >
Steel Reinforced Corrugated Pipe SRPE 2400

Steel Reinforced Corrugated Pipe SRPE 2400
1Pages

Catalog excerpts

Steel Reinforced Corrugated Pipe SRPE 2400 - 1

Steel Reinforced Corrugated Pipe Production Line Steel reinforced polyethylene corrugated pipe (SRCP) was developed by Goldstone in 2004 based on existing spiral wound pipe technology. SRCP is a new conception for large diameter composite pipe design and manufacturing. SRCP employs a multilayer wall construction consisting of inner and outer polyethylene layers and an omega-shape steel profile bonded to the two polyethylene layers by an adhesive. Such construction maintains the key properties of polyethylene pipes (low coefficient of friction, chemical resistance, lightweight, etc.) while also benefiting from the structural properties of steel (high stiffness). Compared to plastic pipe, the use of steel in SRCP pipe provides higher resistance to external loads but lower consumption in raw materials. Using the spiral wound pipe processing method combined with steel reinforcing technology,allows large inner diameter SRCP pipe to be produced from 300 mm (12 inch) up to 3000 mm (125 inch) with pipe ring stiffness ranges typically from SN8 (63Psi) to SN16 (158Psi), or even higher. There are now many industry standards for SRCP that have been issued by different countries and organizations including ASTMF 2435-15, CJ_T 225-2011, UN111434 ITA, CSAB182.14-15, SII458, etc. Production Line Specification GS/TL-1200 ® 300mm-® 1200mm 40m/h Wafer Consumption SRCP Pipe Specification Pipe Advantages - The economical solution for sewage/drainage pipe system - Large diameter pipe, DN300-DN3000mm - Material cost saving up to 30%-50% compared with none steel reinforced pipe - Surprising pipe stiffness SN8, SN12.5, SN16 and higher

Open the catalog to page 1