Display Digital Decimal Point Function Operating Differential Pressure Low Differential Pressure Specification Depend on types of gas and flow rates to be used. MSS Flaw CMTMURS- Flow Rate & Totalizer LCD Display- Flow Rate With or Without LCD Display ±1% Accuracy Linear Output Thermal Technology For Using in Non Corrosive Gas Approvals: For Flow Rates up to 200 SLM * , Power Supply Included ^ * The NEW-FLOW Thermomal Mass Flow Meters provide high performance. Thermal Technology offers advantages in accuracy, sensitivity and turn quality components and the latest technology are combined to provide reliable, compact meters and controllers. The TMFC Series comes With or Without an LCD Display; or Flow Rate with Totalizer LCD Display. All models come with linear 0-5VDC and 4-20mA output. The TMFC Series measures the mass flow rate of pses in 3 ranges from 0-100 SLM to 0-200 SLM as shown in the range table. The TMFC Series combines a mass flow transducer with an electromagnetic proportional valve. Valves are not recommended as shut off valves. Controllers use a 0-5VDC linear set-point signal supplied from the local set-point pot or from a remote source. Type: Without LCD Display; Flow Rate with LCD Display & Blue Back Lighted; Flow Rate with Totalizer LCD Display & Blue Back Lighted Wetted Parts Material: Standard flowbody-SS316, option available. O-ring: Viton or FFKM available Output Signal: 0-5 VDC Linear min. load 1000Q or 4-20 mA Linear, loop resistance 5000 Input Power: 24VDC standard Accuracy: ±1% F.S. (including linearity) Turn Down Ratio: 100:1 Repeatability: ±0.15% F.S. or Better Electric Connection: 9 Pin Sub “D" Process Connection: V£"NPT female Control Signal: Integral or 0-5 VDC Control Valve: Electromagnetic N/C (Norm. Closed) Range: 0-100 SLM to 0-200 SLM Max. Pressure: 500 psig Temperature Ranp: 0~50°C Response Time: 1 Second Temp. Coefficient: 0.05% Full Scale per 1°C or Better Pressure Coefficient: 0.01% Full Scale per PSIG or Better Flow Unit: Kg, GAL, N£, Nm3, cc, t, M3 (Flow rate with LCD display: Label by manufacturer; Flow rate with totalizer LCD display: Unit LCD display) Weight: app. 3.27 kg with power supply app. 3.41 kg with power supply & totalizer WWW.NEW-FLOW.COM • TEL: 886-7-8135500 • FAX: 886-7-8225588 • Email: [email protected]

Range Table Code *Please noteice that the max. flow rate is 200 SLM. Ordering Information oiMar202i ^ WWW.NEW-FLOW.COM • TEL: 886-7-8135500 • FAX: 886-7-8225588 • Email: [email protected] Flow Direction ■ Please follow the direction of arrow “+■" on the label to install. (As shown on the left is the standard installation.) ■ rDo NOTj install the controller type by “Vertical 4- or 4".