Automotive Test Solutions OGQPEL electronic

Automotive Test Solutions Single components Single Components Communication controller Flexible multibus controller for CAN/CAN FD/FlexRay/ Automotive Ethernet/'LIN • available as stand-alone boxes in a range of performance classes and as PCIe/PXIe cards • additional digital and analogue I/O channels as well as SENT Tx/ • execution of user applications directly on the hardware within a real-time operating system • rest bus simulations and testing of complex control units • transport and diagnostic protocols, network management, XCP, SecOC, etc. provided directly on the hardware • ideal for high-performance...

Single components Automotive Test Solutions CAN Bus Controller • feed-in option for the power supply under test via two 4 mm banana sockets on the rear of the device • breakout panel with separate 9-pin D-Sub connector for each communication interface • four 4 mm banana sockets on the front of the unit (2x Terminal 30, 1x Terminal 31, 1x Terminal 15 - can be switched on/off using relay with max. 5 A) • 9 status LEDs on the front of the unit ‘functional scope can be optionally expanded LIN-/K-Line Controller LIN and K-Line applications in the automotive industry up to four independent LIN/K-Line...

Automotive Test Solutions Single components basicMOST ■ PXI 6161 MOST MOST150 Controller MOST protocol for 150 Mbit/s oPHY choice of frame rate: 44.1 kHz/48 kHz MOST High protocol V2.2 on packet/control channel on-board diagnostics via MOST High protocol V2.2 /TP2.0 ring break diagnostics/ECL additional front-panel Ethernet port optional S/PDIF input/output additional triggers - front-panel inputs/outputs two optional CAN and/or LIN interfaces Configuration overview: Expansion capabilities of Series 61 modules Option 1: additional CAN or LIN/K-Line port / Option 2: additional FlexRay port / Option...

Single components Automotive Test Solutions basic CON 4055 CAN FD stress and trigger module • stress and trigger function for CAN and CAN FD • frame trigger for SOF, ID, ESI, CRC DEL and error frames • extended frame trigger for recessive bit in stuff bit count • innovative, patent-pending frame filter ■ automatic pass-through filter • blocking filter • injection of different disturbance types, such as time, interval or endurance disturbances • output of the desired fault sequence via selectable transceivers • configurable trigger output for external resources • easy integration into user-specific...

Automotive Test Solutions Compact systems Compact systems Communication systems MagicCAR compact Compact test platform for automotive control units • compact, scalable automotive stand-alone platform with a focus on: • Network compliance tests • infotainment test • Customer-specific function and quality tests • internal Ethernet architecture based on GOPEL electronic standard products • programmable power supply and integrated current measurement • supports CAN FD, LIN, FlexRay, Automotive Ethernet and K-Line • supports infotainment interfaces such a MOST and LVDS e. g. APIX, GMSL and FPD-Link...

Acoustic analysis Automotive Test Solutions Sound Checker ™ Acoustic analysis • affordable analysis of structure-borne and airborne noise • detection of interfering noises and assembly errors in mechanical systems via frequency analysis • for laboratory and end-of-line solutions • supported sensors: • various structure-borne noise sensors • all common types of industrial microphones • with optional AI connection interfaces ‘overview of accessories available on request. Acoustic tester • ideal for use during development, prototyping and series production in end-of-line (EoL) testing • synchronised...

Automotive Test Solutions Engine testing systems Electric motor testing systems Electric motors and drives go a long way from development, to first prototypes, to series production. It is therefore particularly important to detect any faults or weaknesses in the product as early as possible. CARMEN offers a wide range of static and dynamic test methods for DC motors. Detailed tests on the characteristic test bench in the laboratory or long-term tests under climatic conditions ensure that electric motors are thoroughly tested and transferred to series production in high quality. CARMEN RD one...

Screening tester Automotive Test SolutionsScreening tester ■ run-in test systems ■ endurance test systems Preventing early failures due to thermal and electrical stress complies with the latest quality requirements of the automotive industry and thus forms the basis for the geographical unrestricted use of vehicles. Vehicle components are operated under cyclically changing environmental scenarios in combination with real loads. As these tests are usually carried out during production for start-up series, random samples or complete series, there are also special challenges for handling, contacting...

Seat test systems Automotive Test SolutionsSeat test systems The OsCAR function test platform is a system family for in-line quality testing of interior components in automotive construction, such as vehicle seats, door boards, roofing or individual components. The system is primarily designed for EoL testing of vehicle seats. It supports the testing of the following quality characteristics or components: Configuration overview: OsCAR

Seat test systems Automotive Test Solutions 10 OsCAR advanced G4 • ideal for use during development, testing and series production • modular and scalable EOL testing platform • configurable to customer specifications • intuitive operating concept • high test coverage • mechanical and electrical function test • pneumatic test • optical test/contour measurement • protection class IP54 - external IP54-protected signal allocation unit (SAU) for customer-specific testing configuration • various seat classes can be combined in one production line - one test system for all seat types • independent,...