Catalogs >
Godiva Ltd. >
PTO MiniCAFS 2.1A

PTO MiniCAFS 2.1A
2Pages

Catalog excerpts

Improving firefighting with the latest CAFS technology The ptoMini-CAFS is a Compressed Air Foam System comprising of three major components –air compressor, FoamLogix 2.1A (foam pump and proportioning) and manifold (foam mixing and control system). The components are installed in locations according to the vehicle manufacturers requirements. The system will make compressed air foam when supplied with water from the main pump at pressures between 4.0 and 7.0 Bar. Water is supplied from the pump discharge and fed, via two non-return valves, into a manifoldassembly where a metered amount of foam (Class A only)is injected into the water flow. This foam/water solution is then fed to an air control valve, where a variable amount of wet or dry foam is selected (air ratio control section of manifold). Compressed air is injected and the resulting foam/water/air solution is thoroughly mixed (X-mixers) before being fed to a discharge flange. PTO-driven MiniCAFS producing CAF PTO-Driven Mini-CAFS Compressed Air Foam System for Vehicle Installation Key benefits of the Pto driven Mini-CAFS system • • • • • • • • CAFS – a more efficient way to fight fires with improved knock down times CAFS - reduced water damage CAFS – reduced environmental damage CAFS – reduced water usage State-of-the-art technology fully integrated into appliance Foam proportioning ratio 0.1% -9.9% Variable Air ratio control selects wet or dry foam Solid-state electronic control system protects operator PTO-driven Mini-CAFS – main components, foam pump, air compressor, mixing manifold and control panel MCP50 2.1A(4)10-05.doc

Open the catalog to page 1