With Ceramic Isolation TF-CX Series Temperature Sensor The Gneuss CX Series Temperature Sensors are specially designed for precise temperature measurement of the melt stream. Their resulting high accuracy is due to the incorporation of the advanced G-Isolate ceramic insulation surrounding the entire measuring element. Commonly influenced by the barrel temperature, the CX series probes with G-Isolate guarantee an accurate reading, independent of the flange or tool location. The design of the CX exceeds the recommended guidelines of the Plastics and Rubber trade association according to EUROMAP 31. • Measuring tip isolated with high-performance ceramic Configuration options • Highly precise temperature measurement • Plug connections with gold-plated contacts • Thermocouple Type J, L, K or RTD • 1/2“20 UNF or M 18 x 1,5 process connection • Special materials for measuring tip (abrasive or corrosive materials) • Available as transmitter with 0...10 V or 4...20  mA • Amplifier for Ex-areas (4...20 mA) with BUZ head • Extremely robust conical measuring element (rheologically optimized) • Applications up to 500°C (932°F ) media temperature • 100% market compatible • Conforms to EUROMAP 31 • Measuring tip length available from 0 mm (0 inch) (flush) to 25 mm (1 inch) • G-Isolate ceramic sleeve (illustration) Product variations (examples) Ceramic insulated measurement tip Measurement element EX-version 4...20 m/A Transmitter BUZ head Cable protection option Flexible component with G-Armor Ceramic sleeve The melt temperature sensors with thermally insulated measurement tip provide the user with a precise and meaningful measurement. Distortion of the measurement value by external or internal heat influences is minimized. The sensor with ceramic insulated measurement tip is therefore particularly recommended for use with thermally sensitive materials due to the authentic measurements which it provides. Special design TF With fully ceramic sensor