a quick guide to GMV products
32Pages

A QUICK GUIDE TO GMV PRODUCTS Valve Units, Power Units, Jacks, Doors, Car frames, Control Cabinets, Kits

PRODUCTS ORGANISATION CHART VALVE UNIT 3100 card Microlevelling 2CH Safety System Pawl Device POWER UNITS DRY HL DRY GL DRY F1 DRY T2 DRY MC/MR HL GL F1 T2 T3 T4 MRL MRL-T LANDING DOORS AND OPERATORS Operators 2AT 2AO 3AT Landing Doors 2AT 2AO 3AT Environmentally friendly fluid Reduced dimensions Competitive price Energy Efficiency Quick installation Large loads JACKS 1 stage Traditional HL 6000 1000 1001 1008 SL (Slim) 1000 SL 1001 SL 1008 SL Telescopic Serie 9000 TCS EC CONTROL CABINETS Easy 400 500 650 Type A, B, C, D, E, F 1 jack 2:1 roping 1:1 roping 2 jacks 1:1 and 2:1 roping Easy Kit...

5. Landing doors and operators 16

VALVE UNIT Fluitronic Components - A3 N 81.2 e rtified E Ce valv or lock with do Symbols Safety Compliance with the standards 2CH system / door lock valve Integrated double safety A3 certificated A3 Amendment to 81.2(1) (with door lock valve) A3 Amendment to EN 81.2(1) (2) “ 2006/42/ CE Machine Directive”(3) Machine Directive 2006/42/CE(2) (with 2CH) MRL, Public building and private housing Compatible power units Installations Energy Efficiency Environmentally friendly fluid Max. speed (m/sec) Speeds Power (kW) Max. working pressure (bar) Incorporated components Pressure switch; Hand pump;...

New electronic valve Thanks to new digital technology, GMV has created a new electronic NGV valve; the most advanced system to control the elevator. It allows greater safety and comfort as well as a reduction in consumption and costs. The main advantages of the NGV valve - Time = - Energy Waste The NGV valve is certified to comply with the A3 Amendment; with integrated double closure there is with no need to modify other components of the lift installation. Traditional valve NGV valve •  Speed up to 1m/sec with no need for any extra equipment. •  Power installed reduction up to 35%(*). • ...

Fluitronic Components Installations Suitable for environmentally friendly fluid Compatible control cabinet Compatible valve unit Fitting to the valve unit (inches) Stroke (stops) Traffic (starts per hour) Pump rate (l/min) Useful fluid volume (l) Min. fluid volume (l) Residential and commercial buildings Residential and commercial buildings Residential and commercial buildings Residential and commercial buildings Residential and commercial buildings Without cabinet Optional 1” connector for pump delivery rates under 55L.

POWER UNITS Fluitronic Components Residential and commercial buildings Residential and commercial buildings Residential and commercial buildings Residential and commercial buildings EASY 500, TYPE A or TYPE B Fitting to the valve unit (inches) Installations Suitable for environmentally friendly fluid Compatible control cabinet Compatible valve unit Traffic (starts per hour) Pump delivery rate (l/min) Useful fluid volume (l) Min. fluid volume (l) (1) Optional 1“ connection for pump delivery under 55L. With the NGV Valve Unit: useful fluid volume 20L.

POWER UNITS Fluitronic Components Depending upon the loac

The main advantage of the external motor is the cost reduction in all aspects. 1. Competitive price 2. Compatible with the new NGV valve (certified to comply with the A3 Amendment to EN 81.2) 3. Up to 25% reduction of energy consumption on general usage (up to 35% saving on installation usage)usage) with theother GMV components with the help of help of other GMV components 4. Accurate in floor levelling (thanks to NGV valve) in compliance with Standard 81.70. 5. Lower volume of fluid (about 30 kg) 6. Oil heaters not required 7. Excellent ride and performance quality 8. Designed to be cost...

FEATURES 2CH safety system in compliance with the A3 Amendment to EN 81.2 standards Further comfort when traveling downwards. Remarkable increase in the life of the motor. Compliant with the new Machine Directive, thanks to the double safety closure and to the A3 Amendment to EN 81.2 standard. Ideal for new installation or modernisations. Monitoring of the valve block control signals to implement the downward control of the lift. Quick and easy installation; can be modified to fit the electrovalve VMP/2CH and 3010. For further information contact GMV main office. Soft-Stop It consists of a...

3100 card Reduces travel time, increases traffic capacity of the power unit and gives an efficient ride quality. It is possible to reach 1 m/s with the 3010 mechanical valve group. Allows increase in the number of travels/hour with the same travel times. Easy adjustment with the programming pad. It constantly monitors the oil temperature and regulates valves to maintain the ride quility. The acceleration ramp is not altered. The control board can be directly installed on the power unit (recommended) or into the control panel. It consists of an electronic circuit (3100-E2), a pressure...

1-STAGE JACKS Fluitronic Components 2:1 indirect side acting Direct central acting 1:1 Direct central acting 1:1 Main advantage Specific for HL and HL DRY control unit Under ground Under ground Environmentally friendly fluid 90% biodegradable (1) The synthetic basis enables greater stability thanks to its high viscosity index versus the conventional oil. Its flash point is higher than 250º C, compared to 216° C of mineral oils. This hydraulic fluid is classified HEES according to the ISO 6743-4 Regulations. It complies with the Environmental Directive 2006/118/CE (1) Certified in compliance...

Decreases installation area required for short travel Extremely versatile Maximum space optimisation Main advantages: •  Reduced oil requirements. •  Quick and simple assembly which is due to the design of the cylinder connections. •  Greater compatibility with reduced-size power units. •  Standard products are readily available for dispatch •  Competitive price.

TELESCOPIC JACKS Fluitronic Components Direct side acting 1:1 Direct side acting 1:1 Direct central acting 1:1 Available stages Model Symbols Synchronisation Main advantage Design for long travels and panoramic installations. Flex piping Flexible piping in synthetic rubber, coated with one or two layers of high resistance spiral metal meshes, with an external layer of synthetic rubber. Available lengths: from 1,5m to 25m with increments of 0,5m. Fittings: steel 9S Mn Pb 28. Technical features Working temperature: from - 40°C to + 100°C. Piping dimensions: 3/4” (90º, DN 19), 1” (DN 25), 1”...