Leader with more than 750,000 lifts worldwide using GMV technology Gearless Belt

Gearless Belt Be assured of a great GMV experience: • With more than 750,000 lifts Worldwide using GMV products, we are moving 100 million people every day • Production units in three continents 2. VERY LOW OPERATING COSTS AS A DIRECT RESULT OF THE QUALITY OF THE PRODUCT • High specification technology • Rational design and structural simplicity • We don't use permanent magnets as they can have the following negative impacts: - limited availability of raw material (the Earth's rare neodymium) - continuously increasing costs - high pollution potential - they have been declared dangerous to health...

ASK THE LIFT COMPANY YOU TRUST FOR A GEARLESS BELT LIFT • Minimal energy consumed in stand-by • No permanent magnets, which: - have a limited life • Low operational costs due to the warranty* • High standard of technology THE LOAD DOES NOT REST ON THE For buildings below 6 floors, we recommend the other leading GMV model of the Green Lift family; the MRL Fluitronio lift, which also offers the same design features. * Possibility of warranty extension to 10 years. For further information, please, call the phone number on the backside

Gearless Belt Walls: Faced - 001 Beige Structure and corners: Pre-painted sheet metal (Polimod) Dark Grey Ceiling: Ceiling with irregular holes (neon) Floor: PVC - 501 Light grey Mirror: Half wall Walls: Faced - 006 Cherry wood Structure and corners: Pre-painted sheet metal (Polimod) Dark Grey Ceiling: Ceiling with led spot lights Floor: PVC-501 Light grey Mirror: Full wall Walls: Pre-painted sheet metal (Polimod) - 204 Light grey Structure and corners: Pre-painted sheet metal (Polimod) Dark grey Ceiling: Neon with led light pipe Mirror: Half wall Walls: Plastic laminated -103 Whitened Structure...

Walls: Plastic laminated -112 Yellow ochre Structure and corners: Pre-painted sheet metal (Polimod) Dark Grey Ceiling: Neon with led light pipe Floor: PVC - 502 Dark grey Mirror: Full wall Walls: Plastic laminated -110 Water green Structure and corners: Pre-painted sheet metal (Polimod) Dark Grey Ceiling: Ceiling with led spot lights Floor: Coconut - 601 Natural Without mirror Walls: Plastic laminated -113 Blue Structure and corners: Pre-painted sheet metal (Polimod) Dark Grey Ceiling: Ceiling with led spot lights Mirror: Full wall Walls: Plastic laminated 108 Dark cherry wood Structure and comers:...

Gearless Belt Pre-painted sheet metal Plastic laminated 112 Yellow ochre 110 Water green Floor coatings 106 Stone silver frost finish 111 White grey stone Stainless steel

Gearless Belt Colours & Materials Stainless steel 'Available in AISI 430 orAISI 304 Ceiling with irregular holes (neon) Standard delivery Ceiling with led spot lights Neon with led light pipe

GLASS WALL PANELS Panoramic glass walls with handrail available Hand rail with epoxy painted alloy alluminium junctions. Chromed steel hand rail, 30 mm diameter, complying with EN 81.70 lift rules. TMC LIFT CAR (tailor made) A tailor made car, with solid but lightweight structure, providing the ideal product for low energy consumption lifts. The simple assembly system allows easy insertion of the car panels, enabling a quick and economic restyling. LANDING DOORS Easy assembly and adjustment of landing doors. Doors manufactured in (Polimod) painted sheet metal, in Scotch Brite stainless steel...

Gearless Belt MACHINE POSITION ABOVE OVERHEAD, DIRECTLY ABOVE THE GUIDE RAILS, WITH HIGH EFFICIENCY THREE PHASE ASYNCHRONOUS - already complies with the IEC 600004/30 standard on energy saving - IE2 classification with frequency changer - easy to locate, low maintenance and can easily be disposed of THE BELT IS AT THE RIGHT PLACE! The trapezoidal "poliV®" type belts are only used for the transmission inside the motor, allowing - extremely quiet travel - high travel comfort and precise arrival at each floor - readily available spare parts - highly efficient with low energy consumption

VERTICAL SECTION SHAFT LAYOUT Motive force (upstream the inverter) 230/400 Volt a.c. - 50 - 60 Hz Controller cabinet is placed at last floor and it has the following measurements: 2210 mm height - 440 mm wide - 265 mm depth Controller cabinet finishes: stainless steel scotch brite or plastic laminate (similar in stainless steel) Attention the measurements given in the table are indicative. For any feasibility contact our technical department

GMV LATINO AMERICA ELEVADORES Ltda HYDRAULIC ELEVATOR COMPONENTS Co. Ltd • CZECH REPUBLIC OILDINAMIC GMV AUFZUGSANTRIEBE GmbH COMPONENTO MANUFACTURING & TRADING PVT.LTD. NICE LIFTSARL* BULUT MAKINA ASANSOR* i UNITED ARAB EMIRATES