No. 1 in the world for hydraulic lift components production Direct acting below jack type1000 is developed to suit heavy load installations (freight lifts) or panoramic lifts with high aesthe- tic standards, requiring good ali- gnment, usually without ropes. This jack is also employed in small elevators to make maxi- mum use of space for the car.A large range of diameters isavailable to meet any load requi- rement. The 1000 jack is also sui- table for heavy load installations or elevators with big cars requi- ring twin jacks. To facilitate tran- sportation and installation in the shaft, this jack can be supplied in 2 - 3 pieces with a threaded joint.The jack is equipped with anupper swivel plate for the connec- tion to the car frame and with a bottom plate for the location in the pit.This jack is designed to be put into a borehole and the cylinder is protected with a waterproof paint. PVC tape is also supplied for protection from galvanic cor- rosion.Jack type 1000 SL is availablefor diameters 60 to 110.The new technology applied tothis SL jack type achieves a con- siderable reduction of the cylin- der diameter, resulting in the employment of a lower quantity of oil and decrease of the lift ela- sticity. A new design of cylinder joint equipped with collar, allows a quicker installation of the jack. >