THE ULTIMATE WATER FILTER High-capacity filter for oil-polluted water DESIGNED AND MADE IN EUROPE

Full compliance with Clean Water Act, EN 61936-1, AS2067 and REACH requirements. FILTRELEC® F1500 can be used instead of or in addition to traditional settling tanks and offset pits. Gravity flowrate of 1,500 litres/minute (25 litres/ second). Hydrocarbon concentration in output filtered water is less than 5 ppm. The filter is installed in a concrete manhole at the offset pit outlet.

Key features Filters fast-flowing oil-polluted water. Complies with French Clean Water legislation: HC<5 mg/L. Keeps costs low. Keeps the amount of land needed for water treatment to a minimum. Keeps excavation and civil engineering works to a minimum. Speeds up site works lead times. Keeps maintenance operations and costs to a minimum. Designed and made in Europe. Functionalities Continuously drains rainwater from retention bunds. Absorbs all traces of hydrocarbons: holding capacity of up to 55 litres of pure mineral oil. Grid Pre-filter Absorbent medium The filter housing is available in either...

Service Design: our experienced staff can offer recommendations to come up with the appropriate technical and economical solution based on the customer requirement. Manufacturing: quality control. Maintenance Pre-filter and absorbent medium integrated in the filter body: once saturated with oil, the prefilter and the absorbent medium can be removed and disposed of in an appropriate manner. Replacement kit (pre-filter and absorbent medium) means that you can re-use the FILTRELEC® F1500 housing. F1500 (EN 04-24) Photographs and technical specifications are non-bindi