Introduction

The document provides detailed specifications and ordering information for the GETH22 Motorized X-Axis, a ball screw driven linear drive system designed for precise motion control applications.

Ordering Method

The ordering code includes parameters such as stroke length (100-1500 mm), ball screw lead (5, 10, 25, 40 mm), motor brand and power output (750W typical), motor position (bottom, right side, left side, in-line), sensor options (home and limit sensors), and brake options (with or without brake).

Mechanical Specifications

• Stroke Length: 100 to 1500 mm with 50 mm pitch increments.
• Ball Screw Diameter: Ø25 mm (C7 grade), with options for Ø20 mm.
• Ball Screw Lead Options: 5 mm, 10 mm, 25 mm, 40 mm.
• Maximum Speed: Up to 2000 mm/s depending on configuration.
• Repeatability: ±0.01 mm.
• Allowable Overhang Moment: Provided in N·m values varying by installation and lead.
• Load Capacities: Horizontal and vertical load ratings ranging from 10 kg to 150 kg depending on model and installation orientation.

Motor and Drive Options

• Compatible servo motors from brands including Yaskawa, Delta, Panasonic, and Mitsubishi, typically 750W output.
• Motor mounting positions: bottom (BM), right side (BC), left side (BL), and in-line (M).
• Driver models include MR-J3-70A, MADDT3520, ASD-B20721-B.
• Brake options: with brake (vertical type) and without brake (horizontal type).

Sensors and Electronics

• Home sensors and limit sensors available in various configurations (internal, external, none).
• Sensor models include EE-SX672 and EE-SX674 (NPN output).
• Light indicator (red) for main circuit load status.

Installation and Performance Notes

• Installation can be horizontal, vertical, or wall-mounted with corresponding static loading moments specified.
• Shaft runout may occur for strokes over 850 mm; deceleration is recommended to mitigate this effect.
• High rigidity linear guides (C7 grade) ensure precision and durability.

Critical Parameters and Recommendations

• Ensure selection of appropriate ball screw lead and motor power based on required speed and load.
• Consider brake options depending on installation orientation (vertical installations typically require brakes).
• Use deceleration strategies for long stroke applications (>850 mm) to maintain accuracy and reduce shaft runout.
• Verify sensor configuration to match control system requirements.

Summary

The GETH22 Motorized X-Axis is a versatile, high-precision linear motion solution suitable for various industrial automation tasks. Its modular design allows customization of stroke length, motor type, sensor options, and installation orientation to meet specific application needs. Proper selection and configuration ensure optimal performance, repeatability, and longevity.