Introduction
The document provides detailed specifications for the GETH17 motorized X-axis linear drive system, which is ball screw driven. It is designed for precise linear motion applications with stroke lengths ranging from 100 mm to 1250 mm and a maximum speed of up to 2000 mm/s.

Main Specifications
- Drive Type: Ball screw driven linear motorized X-axis.
- Stroke Length: Standard strokes from 100 mm to 1250 mm with 50 mm pitch increments.
- Maximum Speed: Up to 2000 mm/s.
- Ball Screw Diameter: Ø20 mm.
- Repeatability: ±0.01 mm.
- Maximum Load Capacity: Horizontal loads up to 120 kg, vertical loads vary depending on configuration.
- Rated Thrust: Specified per model and lead.

Motor and Drive Options
- Compatible with various servo motors from brands such as Yaskawa, Delta, Panasonic, and Mitsubishi.
- Motor power output typically 750 W.
- Motor mounting positions include bottom, right side, left side, and in-line.
- Brake options available for vertical applications.
- Driver models include MR-J3-70A, MADDT3520, ASD-B20721-B.

Mechanical Parameters
- Ball screw leads available: 5 mm, 10 mm, 20 mm, 40 mm.
- Coupling sizes and linear guide dimensions specified for rigidity and precision.
- Allowable overhang torque values provided for different configurations.
- Static loading moments and maximum load capacities detailed for horizontal, vertical, and wall installations.

Sensors and Electronics
- Home sensors and limit sensors options detailed, including built-in and external types.
- Sensor circuit diagrams referenced for installation.
- Light indicator (red) for main circuit load status.

Ordering and Model Identification
- Model numbers encode stroke length, motor type, motor position, sensor options, and brake presence.
- Special order numbers available for custom configurations.

Notes and Recommendations
- Shaft runout may occur for strokes over 850 mm; deceleration is recommended to mitigate this.
- Brake presence indicated by "B" in model codes.
- Some configurations or options may be marked as not applicable ("-").

Summary
The GETH17 series offers a versatile, high-precision linear motion solution with customizable stroke lengths, motor options, and sensor configurations. It is suitable for applications requiring high speed, repeatability, and load capacity. Proper selection of motor, brake, and sensor options is critical to meet specific application requirements. Attention should be paid to stroke length limitations to avoid mechanical issues such as shaft runout.