Introduction
This document provides technical specifications for the GETH10 motorized X-axis, which is ball screw driven and designed for linear drive applications. It includes details on the model's capabilities, motor options, and sensor configurations.

Specifications
The GETH10 model features a single-axis ball screw drive with a maximum stroke of 1000 mm and a speed of 1000 mm/s. The ball screw diameter is Ø16 mm, and the motor output is 100W. The model supports various motor brands, including Yaskawa, Delta, Panasonic, and Mitsubishi, with options for motors with or without brakes.

Motor Position and Sensor Options
The motor can be positioned at the bottom, right side, left side, or in-line. Sensor options include home and limit sensors, which can be external or internal, with configurations for motor side or opposite motor side.

Performance and Load Capacity
The GETH10 offers a repeatability of ±0.01 mm and supports maximum loads of up to 50 kg horizontally and 22 kg vertically. The rated thrust is specified, and the model includes a high rigidity linear guide.

Servo Motor Options
Various servo motor options are available from brands like Panasonic, Mitsubishi, and Delta. These motors can be configured with or without brakes, depending on the installation type (horizontal or vertical).

Additional Notes
For strokes over 750 mm, shaft runout may occur, and deceleration is recommended to mitigate this issue.