Catalog excerpts
Aluminium Transport & Logistics Equipment for the textile industry
Open the catalog to page 1GMÖHLING Transportgeräte GmbH Since 1941 partner of the textile industry - made in Germany 2
Open the catalog to page 2Tailor-made logistic solutions! Gmöhling has over 75 years of expertise in manufacturing aluminium containers for the textile industry in Germany. Our product range extends from trolleys for fabric transport, flyer bobbins, bobbin doffers through tube doffing boxes & tube boxes for ring spinning machines (e.g. Zinser/Rieter) up to individual transport containers and spring-loaded base trolleys. Of course all also available in versions suitable for steaming machines and in tailor made sizes. Since decades our logistic solutions for the textile industry are in use all around the world. Thanks...
Open the catalog to page 3Roving bobbin trolley E 41 Material: aluminium
Open the catalog to page 4Also available with compartments for empty tubes. Slanting bottom where the bobbins and tubes can be safely stacked. Chassis: 2 fixed and 2 swivel castors full rubber wheels with a diameter of 125, 160 or 200 mm (depending on the load) roller bearings and threadguards Application: doffing of roving bobbins at the flyer or finisher; withdrawal of empty tubes from the tube compartment for replenishing transport and intermediate storage of bobbins Result: a safe and time saving handling of bobbins and tubes with an ergonomic working method Required technical specifications for quotations:...
Open the catalog to page 5Roving bobbin G®-ERGO trolley with spring-loaded base Material: aluminium I plain or anodised The spring-loaded base keeps the bobbins at an almost constant height: this avoids physical strain on the workers and protects the yarn when loading and unloading the trolley. Application: doffing of roving bobbins at the flyer or finisher transport and intermediate storage of the bobbins direct feed of the bobbins onto the creels of the ring spinning machine also recommended for the transport of empty tubes Required technical specifications for quotations: diameter and tube length of a bobbin...
Open the catalog to page 6Trolley with spring-loaded bottom G®-ERGO D 1408 and G®-ERGO D 5408 with sliding guidance, aluminium & anodised Trolley with spring-loaded bottom D 04 based on pantographic system, aluminium & anodised Thanks to 8 ball-bearings guided in robust extrusions, the constant function of the base is guaranteed even if the load is not equally distributed. The parallel guiding of the bottom is realised by the pantographic mechanism; the base can be box-shaped which reduce the friction between the walls and the load (especially recommended for small dimensioned yarn bodies: cops). The spring systems...
Open the catalog to page 7Cops trolley with spring-loaded base D 04 Material: aluminium
Open the catalog to page 8Walls and spring-loaded bottom are perforated with holes of a diameter of 10 mm; the distance between the centers of the holes is 22,5 mm. To avoid damages to the yarn due to friction between yarn and walls and to reduce the surfaces of contact, the rims of the holes in the walls are embossed towards the outside. On demand the trolley can be produced to be used with tilting device. Application: reception of cops at the ring spinning machine careful treatment of cops and tubes by reduction of the falling height transport to the automatic cross bobbin winder with filling device, or to the...
Open the catalog to page 9Yarn steaming trolley G®-TRANS D 3008 and D 04 with spring-loaded base Material: aluminium | perforated Other devices and anodised on demand. 10
Open the catalog to page 10All yarn steaming trolley have the following in common: the walls and the bottom are perforated with holes of 10 mm diameter; distance between the centers ot the holes: 22,5 mm; to reduce the contact between yarn and walls as much as possible the rims of the holes can be embossed towards the outside. Yarn steaming trolley G®-TRANS D 3008 perforated in aluminium Application: doffing of cops at ring spinning machines with automatic doffers steaming of yarn in steamers; feeding at cross bobbin winders with feed device (preparation station) steaming of cross bobbins in the steamer Required...
Open the catalog to page 11Wheel arrangement Custom size and anodised version on demand.
Open the catalog to page 12Walls reinforced with all-round trapezoidal beading (rib). Plain bottom supported by the chassis. Chassis: 2 fixed and 2 swivel castors dimensions and castor arrangement based on your requirements Application: transport and storage of roving bobbins, cops, tubes, cross bobbins, hank yarn and waste in perforated version to be used in steamer or in air-conditioned rooms all types of trolleys are also available in a stackable version Required technical specifications for quotations: wheel arrangement, weight of load, if an anodised version and any additional elements are required internal...
Open the catalog to page 13Cops trolley G®-TRANS D 3008 Material: aluminium
Open the catalog to page 14Application: reception of cops during the automatic doffing procedure and transport to the automatic bobbin winders in perforated version usable steaming Required technical specifications for quotations: internal dimensions of the trolley (length x width x height ) and – if applicable – maximum external dimensions, or number of spindles per ring spinning machine and its brand, ring diameter and length of tube brand and type of automatic bobbin winder wheel arrangement see page 12 Alternative transport equipment: cops trolley D 04 with spring-loaded base
Open the catalog to page 15Bobbin trolley E 42 Material: aluminium E 4210 E 4211 Tube pins, arranged on both sides of the Tube pins, arranged on one side of the trolley, accessible from both length sides. trolley, accessible from one length side. 16 E 4212 Tube pins, arranged on both sides of the trolley, accessible from both front sides.
Open the catalog to page 16All bobbin trolleys E 42 have very robust rounded pin holder tubes. Size, arrangement and number of pins according to your requirements. Chassis: 2 fixed and 2 swivel castors with galvanized wheel forks full rubber wheels with a diameter of 125, 160 or 200 mm (depending on the load weight) roller bearings and threadguards when used in the steamer the tyres consist of heat-resistant polyamide with roller bearings, and the axles are made of rust-proof refined steel Application: transport of all kinds of bobbins steaming, humidifying and controlling of bobbins Required technical specifications...
Open the catalog to page 17All Gmöhling Transportgeräte GmbH catalogs and technical brochures
-
GMOHLING Product catalogue
65 Pages
-
Image brochure Gmöhling
12 Pages
-
E-Commerce
2 Pages
-
Action force
2 Pages
-
Product catalogue
65 Pages