D1052S, D1052D, D1052X, D1052Y - 4 Pages

Add to MyDirectIndustry favorites
D1052S, D1052D, D1052X, D1052Y

Catalog excerpts

Characteristics: General Description: The single and dual channel DIN Rail Analog Signal Converter D1052S and D1052D accepts a voltage or current input from externally powered transmitters, located in Hazardous Area, and converts, with isolation, the signal to drive a Safe Area load. Output signal can be direct or reverse. Duplicator type D1052X provides two independent outputs for the single input. Adder, subtractor, low/high selector type D1052Y provides two independent outputs representing input A, input B, input A plus input B, input A minus input B, low/high selector. Function: 1 or 2 channels I.S. input from separately powered transmitters, provides 3 port isolation (input/output/supply) and current (source mode) or voltage output signal. Duplicator type D1052X and adder, subtractor, low/high selector type D1052Y. Signalling LED: Power supply indication (green). Configurability: Totally software configurable, no jumpers or switches, mA or V input/output signal, linear or reverse by GM Pocket Portable Configurator PPC1090, powered by the unit or configured by PC via RS-232 serial line with PPC1092 Adapter and SWC1090 Configurator software. To operate PPC1090 or PPC1092 refer to instruction manual. EMC: Fully compliant with CE marking applicable requirements. • Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. • 0/4-20 mA, 0/1-5 V, 0/2-10 V Input-Output Signal linear or reverse. • Duplicated output for single input (D1052X). • Adder, Subtractor, low/high Selector (D1052Y). • High Accuracy, pP controlled A/D converter. • Three port isolation, Input/Output/Supply. • EMC Compatibility to EN61000-6-2, EN61000-6-4. • Fully programmable operating parameters. • ATEX, IECEx, UL & C-UL, FM & FM-C, Russian and Ukrainian Certifications. • Type Approval Certificate DNV and KR for marine applications. • High Reliability, SMD components. • High Density, two channels per unit. • Simplified installation using standard DIN Rail and plug-in terminal blocks. • 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier. Operating parameters are programmable by the GM Pocket Portable Configurator PPC1090 or via RS-232 serial line with PPC1092 Adapter and SWC1090 Configurator software. If the parameters are provided with the purchasing order the unit will be configured accordingly, otherwise the unit will be supplied with default parameters. Technical Data: Supply: 12-24 Vdc nom (10 to 30 Vdc) reverse polarity protected, ripple within voltage limits s 5 Vpp. Current consumption @ 24 V: 70 mA for 2 channels D1052D, 45 mA for 1 channel D1052S with 20 mA output typical. Current consumption @ 12 V: 140 mA for 2 channels D1052D, 80 mA for 1 channel D1052S with 20 mA output typical. Power dissipation: 1.5 W for 2 channels D1052D, 1.0 W for 1 channel D1052S with 24 V supply voltage and 20 mA output typical. Max. power consumption: at 30 V supply voltage, overload condition and PPC1090 connected, 2.1 W for 2 channels D1052D, 1.4 W for 1 channel D1052S. Isolation (Test Voltage): I.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V. Input: 0/4 to 20 mA (-4 to +24 mA reading) separately powered input, voltage drop s 0.5 V or 0/1 to 5 V or 0/2 to 10 V (-2 to +12 V reading) 1 MQ impedance. Integration time: 100 ms. Resolution: 1 pA on current input, 1 mV on voltage input. Visualization: 1 pA on current input, 1 mV on voltage input. Input range: -4 to +24 mA on current input, -2 to +12 V on voltage input. Burnout: enabled or disabled. Analog output can be programmed to detect burnout condition with downscale or highscale forcing. Burnout range: low and high separated trip point value programmable between -5 to +25 mA on current input and -3 to +13 V on voltage input. Output: 0/4 to 20 mA, on max. 600 Q load source mode, current limited at 22 mA or 0/1 to 5 V or 0/2 to 10 V signal, limited at 11 V. Resolution: 2 pA current output or 1 mV voltage output. Transfer characteristic: linear or reverse. Response time: s 50 ms (10 to 90 % step change). Output ripple: s 20 mVrms on 250 Q load. Performance: Ref. Conditions 24 V supply, 250 Q load, 23 ± 1 °C ambient temperature. Input: Calibration and linearity accuracy: s ± 20 pA on current input or s ± 10 mV on voltage input. Temperature influence: s ± 2 pA, 1 mV of input for a 1 °C change. Analog Output: Calibration accuracy: s ± 0.1 % of full scale. Linearity error: s ± 0.05 % of full scale. Supply voltage influence: s ± 0.05 % of full scale for a min to max supply change. Load influence: s ± 0.05 % of full scale for a 0 to 100 % load resistance change. Temperature influence: s ± 0.01 % on zero and span for a 1 °C change. Compatibility: /* £ CE mark compliant, conforms to 94/9/EC Atex Directive and to V. ^ 2004/108/CE EMC Directive. Environmental conditions: Operating: temperature limits -20 to + 60 °C, relative humidity max 90 % non condensing, up to 35 °C. Storage: temperature limits - 45 to + 80 °C. Safety Description: <S> SI ^ C- S31 MI II (1) G [Ex ia Ga] 11C, II (1) D [Ex ia Da] NIC, I (Ml) [Ex ia Ma] I, II 3G Ex nA II T4, [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I associated electrical apparatus. Uo/Voc = 10.8 V, Io/Isc = 4 mA, Po/Po = 11 mW at terminals 14-15-16, 10-11-12. Ui/Vmax = 30 V, Ci = 4.5 nF, Li = 0 nH at terminals 14-15-16, 10-11-12. Um = 250 Vrms, -20 °C s Ta s 60°C. Approvals: DMT 01 ATEX E 042 X conforms to EN60079-0, EN60079-11, EN60079-26, EN61241-0, EN61241-11, IECEx BVS 07.0027X conforms to IEC60079-0, IEC60079-11, IEC60079-26, IEC61241-0, IEC61241-11, IMQ 09 ATEX 013 X conforms to EN60079-0, EN60079-15, UL & C-UL E222308 conforms to UL913 (Div.1), UL 60079-0 (General, All Zones), UL60079-11 (Intrinsic Safety “i” Zones 0 & 1), UL60079-15 (”n” Zone 2), UL 1604 (Div.2) for UL and CSA-C22.2 No.157-92 (Div.1), CSA-E60079-0 (General, All Zones), CSA-E60079-11 (Intrinsic Safety “i” Zones 0 & 1), CSA-C22.2 No. 213-M1987 (Div. 2) and CSA-E60079-15 (”n” Zone 2) for C-UL, refer to control drawing ISM0137 for complete UL and C-UL safety and installation instructions, FM & FM-C No. 3024643, 3029921C, conforms to Class 3600, 3610, 3611,3810 and C22.2 No.142, C22.2 No.157, C22.2 No.213, E60079-0, E60079-11, E60079-15, Russia according to GOST, R 51330.0-99, R 51330.10-99 [Exia] IIC X, Ukraine according to GOST,22782.0,22782.5 Exia IIC X, DNV and KR Type Approval Certificate for marine applications. Mounting: T35 DIN Rail according to EN50022. Weight: about 170 g D1052D, 140 g D1052S. Connection: by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2. Location: Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation. Protection class: IP 20. Dimensions: Width 22.5 mm, Depth 99 mm, Height 114.5 mm.

 Open the catalog to page 1

All G.M. International srl catalogs and technical brochures

  1. Model 5700

    4 Pages