*mydirectindustry

BRO-MET®/LD

Product catalog summary

Overview: The document provides technical specifications for the BRO-MET®/LD, a wrapped bronze sliding bearing with perforations, designed for low-maintenance applications. It is a product of GLT-GleitLagerTechnik® GmbH.

Specifications:

Material: CuSn8P (DIN 17662)
Static Load Capacity: ≤ 120 N/mm² at max. 0.01 m/s
Dynamic Load Capacity: ≤ 40 N/mm² at max. 2.0 m/s
Sliding Speed: ≤ 2.5 m/s depending on lubrication
Friction Value: 0.05 to 0.20 µ depending on lubrication
Temperature Range: -40 to +150 °C
Max. Pv Value: 2.8 N/mm² x m/s

Tolerance Details:

Housing Diameter: H7
Bushing Inner Diameter after Mounting: H9
Shaft Tolerance: f7 to h8

Materials and Mounting Advice:

Shaft Material: Steel, hardened or untempered, surface roughness ≤ Rz 6.3
Mounting Bevel: Minimum 1.5 mm x 15-45°
Force Fitting Mandrel: Recommended for mounting
Lubrication: Primary lubrication necessary; oil or grease lubrication possible

Product Variants: The document lists various sizes of cylindrical bushings available, with measurements provided in millimeters and also available in inch sizes.

Catalog excerpts

BRO-MET® is a registered trademark of GLT-GleitLagerTechnik® GmbH BRO-MET /LD ® Wrapped bronze sliding bearing, perforations, sealing, low-maintenance 73

Open the catalog to page 1

BRO-MET ®/LD T echnical data BRO-MET®/LD Wrapped bronze sliding bearing, with perforations • Punched • With sealing at both ends Low-maintenance • DIN 1494 / ISO 3547 properties Good load capacity and stability at low abrasion, with seal against humidity and external contamination. Extended lubrication clearances. All special designs are produced at short notice! materials supporting material CuSn8P (DIN 17662) material properties Specific load capacity static Specific load capacity dynamic ≤ 2,5 [ m/s ] depending on lubrication Friction value 0,05 to 0,20 [ µ ] depending on lubrication -40 to...

Open the catalog to page 2

Cylindrical bushing Also available in inch sizes! GLT-GleitLagerTechnik9 GmbH • Stahlgruberring 26 • D-81829 Munich • Tel +49 (0)89-4370799-0 • Fax +49 (0)89-4370799-44 • inloC" s,>l(-gleitlagertechnik.de

Open the catalog to page 3