*mydirectindustry

BRO-MET®/L

Product catalog summary

Overview: The document outlines the technical specifications for BRO-MET®/L, a low-maintenance wrapped bronze sliding bearing with perforations, produced by GLT-GleitLagerTechnik® GmbH. It covers material properties, tolerances, and maintenance requirements.

Specifications:

Material: CuSn8P (DIN 17662)
Static Load Capacity: ≤ 120 N/mm² at max. 0.01 m/s
Dynamic Load Capacity: ≤ 40 N/mm² at max. 2.0 m/s
Sliding Speed: ≤ 2.5 m/s depending on lubrication
Friction Value: 0.05 to 0.20 µ depending on lubrication
Temperature Range: -40 to +250 °C
Max. Pv Value: 2.8 N/mm² x m/s

Tolerance Details:

Housing Diameter: H7
Bushing Inner Diameter after Mounting: H9
Shaft Tolerance: f7 to h8

Mounting Advice: Use a force fitting mandrel and consider grease lubrication of the outer surface during mounting. Ensure a mounting bevel of at least 1.5 mm x 15-45°.

Maintenance: Primary lubrication is necessary, with options for oil or grease lubrication. Lubrication pockets help minimize lubrication clearances.

Product Variants: The document lists various cylindrical and flanged bushing sizes, as well as strips, available in both metric and inch measurements.

Product Specifications:

BMB/L Series: Includes flanged bushings with varying dimensions, identified by a unique code and measurements in the format d/D/D1 x L.
BMZ/L Series: Includes bushings with measurements in the format d/D x L, indicating a range of sizes.

Additional Information:

Products are available in inch sizes, catering to different market needs.
Contact information for GLT-GleitLagerTechnik® GmbH is provided, including their address in Munich, Germany, and contact numbers for inquiries.

Key Takeaways:

The document serves as a technical specification sheet for potential buyers or engineers seeking specific bushing sizes.
It highlights the variety of sizes available, ensuring compatibility with different mechanical requirements.

Catalog excerpts

BRO-MET® is a registered trademark of GLT-GleitLagerTechnik® GmbH BRO-MET /L ® Wrapped bronze sliding bearing, perforations, low-maintenance 67

Open the catalog to page 1

BRO-MET ®/L T echnical data BRO-MET®/L Wrapped bronzed sliding bearing with perforations • Punched • Low-maintenance DIN 1494 / ISO 3547 Properties Good load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum! We produce all special designs at short notice! materials supporting material BMZ/L Cylindrical CuSn8P (DIN 17662) material properties BMS/L Strips ≤ 120 [ N/mm² ] at max. 0,01 m/s Specific load capacity dynamic ≤ 40 [ N/mm² ] at max. 2,0 m/s Sliding speed ≤ 2,5 [ m/s ] depending on lubrication Friction value 0,05 to 0,20 [ µ...

Open the catalog to page 2

Also available in inch sizes! Cylindrical bushing GLT-GleitLagerTechnik® GmbH • Stahlgruberring 26 • D-81829 Munich • Tel +49 (0)89-4370799-0 • Fax +49 (0)89-4370799-44 • [email protected]

Open the catalog to page 3

Also available in inch sizes! GLT-GleitLagerTechnik® GmbH • Stahlgruberring 26 • D-81829 Munich • Tel +49 (0)89-4370799-0 • Fax +49 (0)89-4370799-44 • [email protected]

Open the catalog to page 4

Also available in inch sizes! GLT-GleitLagerTechnik® GmbH • Stahlgruberring 26 • D-81829 Munich • Tel +49 (0)89-4370799-0 • Fax +49 (0)89-4370799-44 • [email protected] I 7 \

Open the catalog to page 5