*mydirectindustry

BIV-MET®/A

Product catalog summary

Overview: The document provides technical specifications and details for BIV-MET®/A, a wrapped composite sliding bearing made of steel/aluminium alloy, produced by GLT-GleitLagerTechnik® GmbH. It is designed for heavy maintenance applications and requires lubrication.

Specifications:

Material Composition: Steel tin-plated with AlSn20Cu sliding layer.
Load Capacity: Static ≤ 100 N/mm², Dynamic ≤ 70 N/mm².
Sliding Speed: Up to 25 m/s.
Friction Value: Ranges from 0.08 to 0.17 µ depending on lubrication.
Temperature Range: -10 to +200 °C.
Max Pv Value: 6.0 N/mm² x m/s.

Tolerance and Mounting:

Tolerances: Housing Ø H7, Bushing-inner Ø after mounting H9, Shaft tolerance f7.
Shaft Material: Steel, hardened or untempered, with surface roughness ≤ Rz 6.3.
Mounting Advice: Use of a force fitting mandrel is recommended. Grease lubrication of the outer surface may be necessary during mounting.

Product Variants:

Cylindrical bushings, thrust washers, and strips are standard. Flanged bushings, punchings, and moldings are available upon request.
Various sizes are listed with specific dimensions for cylindrical bushings (BIZ/A), thrust washers (BIA/A), and strips (BIS/A).

Maintenance: BIV-MET®/A bearings are maintenance-bound and require oil or grease lubrication.

Catalog excerpts

BIV-MET® is a registered trademark of GLT-GleitLagerTechnik® GmbH BIV-MET /A ® Wrapped composite sliding bearing, steel/aluminium alloy, lubrications pockets, heavy-maintenance 81

Open the catalog to page 1

BIV-MET ®/A T echnical data BIV-MET®/A Wrapped composite sliding bearing steel / aluminium alloy • Maintenance-bound DIN 1494 / ISO 3547 Properties For high sliding speeds, excellent sliding behaviour with good lubricant supply. We produce all special designs at short notice! materials Support material Steel tin-plated Sliding layer AlSn20Cu material properties BIZ/A Cylindrical bushing BIA/A Thrust washer BIS/A Strips Specific load capacity static ≤ 100 [ N/mm² ] Specific load capacity dynamic ≤ 70 [ N/mm² ] Sliding speed ≤ 25 [ m/s ] Friction value 0,08 to 0,17 [ µ ] depending on lubrication...

Open the catalog to page 2

Also available in inch sizes!

Open the catalog to page 3

BIV-MET ®/A measurements in mm BIA/A, BIS/A BIA/A Thrust washer Also available in inch sizes! BIS/A t d Strips t L D B Art. Nr. d/Dxt Art. Nr. BxLxt BIA/A 10/1 10/20x1,5 BIS/A 10240 245 x 500 x 1,0 BIA/A 12/1 12/24x1,5 BIS/A 15240 245 x 500 x 1,5 BIA/A 14/1 14/26x1,5 BIS/A 20240 245 x 500 x 2,0 BIA/A 16/1 16/30x1,5 BIS/A 25240 245 x 500 x 2,5 BIA/A 18/1 18/32x1,5 BIS/A 30240 245 x 500 x 3,0 BIA/A 20/1 20/36x1,5 BIA/A 22/1 22/38x1,5 BIA/A 24/1 24/42x1,5 BIA/A 26/1 26/44x1,5 BIA/A 28/1 28/48x1,5 BIA/A 32/1 32/54x1,5 BIA/A 38/1 42/66x1,5 BIA/A 48/2 48/74x2 BIA/A 52/2 52/78x2 BIA/A 62/2 84 38/62x1,5...

Open the catalog to page 4