1. Catalogs
  2. Globalsys
  3. User guide base Airlink 2085

User guide base Airlink 2085
1 /7Pages

User guide base Airlink 2085

User guide base Airlink 2085
1 /7Pages

Catalog excerpts

User guide base Airlink 2085-2

• Full duplex audio wideband • Up to 4 portables devices can communicate with the aircraft station • Removable battery pack • Qualified for Europe, US, Brazi, Japan, Taiwan Frequency range : Transmit power : Receive sensitivity : Modulation : Modulation depth : Range : Base station input : Base Station output : Using temperature : Charging temperature IP protection level : On-concrete drop : Battery type: Battery life: 1870 - 1930 MHz (adjusted according to local regulation) EU:23 dBm; US/JPN:21dBm -93 -92 -89 dBm GFSK 1.152 Mbaud DECT GFSK bandwidth = 20 dB < 1,728 MHz Up to 300 meters Range...

 Open the catalog to page 2
User guide base Airlink 2085-3

Guidelines Adjustments and maintenance should be done according to manufacturer instructions. Aircraft station can deteriorate with use, it is therefore advised to inspect them at regular intervals in order to detect any cracks or leaks, for example . This aircraft station is equipped with an audio-electric input device. The user should verify that it works properly before using it. If the user notices a distortion or a defect, he/she should refer to the manufacturer's instructions. Product description The Globalsys Airlink 2085 aircraft base is designed to create wireless communication between...

 Open the catalog to page 3
User guide base Airlink 2085-4

Overview Airlink 2085 aircraft base Protective bumper “STATUS” indicator Bottom view Removable battery USB-C charger

 Open the catalog to page 4
User guide base Airlink 2085-5

Battery autonomy Battery > 50 % Battery < 50 % Battery < 10 % Press ON/OFF button during 3s to turn ON or OFF the unit. Battery can be charged through a USB-C cable or a rack charger. Remove battery 1. Remove the protective bumper from the aircraft station 2. Press the two lockers and slide the battery. Static : no communication Flashing : communication is established Battery charge Led red : battery is charging Led off : battery charged Pairing (only first time) Wait 10s after power on the devices to ensure units are not already paired (devices are already connected if LEDs flash on both unit)...

 Open the catalog to page 5
User guide base Airlink 2085-7

2b, avenue Hélène Boucher, 94380, Bonneuil-Sur-Marne Phone : +331 43 99 42 17 Mail : [email protected] Website : global-sys.com

 Open the catalog to page 7
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.