SILICONE SHEET REFERENCE: SS DESCRIPTION: Silicone Sheet 250°C MATERIAL: High temperature Silicone 250°C See the material data sheet DIMENSIONAL TOLERANCE The dimensional tolerance of the Silicone Sheet is according the RMA A3 For Rubber Sheets APLICATIONS: Powder Coating, Wet Coating, E-Coating, Plating, Anodizing. USES: The Silicone Sheet is normally used to produce silicone Die Cuts such as Gaskets and joints. It is served as a plain material in sheets of 1sqm (1m x 1m). But it also can be served customize shaped according the customer specifications. RECOMMENDATIONS for USE: There are no specific recommendations for use in this product so it will depend on the final use and shape it will be used in. STORAGE RECOMMENDATIONS: Storing this product away from direct sunlight and at a temperature between 20° C and 25° C is recommended in order to prevent any modifications to the properties such as flexibility, elasticity or decolouring, among others. The material this product is made of possesses no health risk nor is it considered hazardous requiring consideration when handling or storing it. EXPIRY This product does not expire, but it may lose plasticity and flexibility if stored inappropriately and/or for more than 5 years. USEFUL LIFE OF THE PRODUCT The useful life of this product depends on the conditions and loads it is subjected to during the process. Chemical products may reduce the useful life of the product.