between 20° C and 25° C is such as flexibility, elasticity or considered hazardous requiring REFERENCE: DFPP DESCRIPTION: Silicone Double Flange Pull Plug 315°C MATERIAL: High temperature Silicone 315°C See the material data sheet DIMENSIONAL TOLERANCE The dimensional tolerance of the Silicone Double Flange Pull Plug is according the RMA A3 APLICATIONS: Powder Coating, Wet Coating, E-Coating, Plating, Anodizing. USES: Used to mask both chambers of a through hole. Range of sizes from M6 to M20 RECOMMENDATIONS for USE: Choose the plug that adapts to the Metric dimension of the Hole to mask. Fix the plug in the hole passing the handle trough the hole and pulling it until the first flange are on the first screw line while the last flange fits perfectly on the last screw line In The right masking position this plug must cover the first and the last screw of the hole. STORAGE RECOMMENDATIONS: Storing this product away from direct sunlight and at a temperature recommended in order to prevent any modifications to the properties decolouring, among others. The material this product is made of possesses no health risk nor is it consideration when handling or storing it. EXPIRATION DATE This product does not expire, but it may lose plasticity and flexibility if stored inappropriately and/or for more than 5 years. USEFUL LIFE OF THE PRODUCT The useful life of this product depends on the conditions and loads it is subjected to during the process. Chemical products may reduce the useful life of the product.