*mydirectindustry

Metal

Product catalog summary

Taper Bushes: The document outlines specifications for taper bushes, detailing dimensions of keyways according to UNI 6604 DIN 6885 standards. It includes bore diameters, hexagon socket screws, tightening torque, bush length, and weight. The material used is EN-GJL 200 as per DIN EN 1561.

V-Grooved Pulleys: Specifications for V-grooved pulleys are provided, with grooves conforming to ISO/BS/DIN standards. Balancing guidelines according to DIN/ISO 1940 are included, with specific instructions for different diameters and speeds.

Ribbed Belt Pulleys: Details on ribbed belt pulleys for taper bushes and plain boring are included, specifying the number of grooves, face width, and taper bush compatibility.

Flat Belt Pulleys: Specifications for flat belt pulleys designed for taper bushes are outlined, including material and bore diameter details.

Motor Slide Rails and Bases: The document lists motor slide rails and bases, though specific details are not provided.

Timing Belt Pulleys: Various types of timing belt pulleys are described, including standard, HTD®, and Poly CHAIN profiles, with bore diameters and taper bush compatibility.

Clamping Plates: Clamping plates for timing belts and polyurethane-timing belts are mentioned, though specific details are not provided.

Special Pulleys: Availability of special and custom-designed pulleys is mentioned, with a note on potential technical changes.

Ribbed Belt Pulleys Overview: Detailed specifications for ribbed belt pulleys designed for taper bushes are provided, including part numbers, material specifications, and dimensions.

Specifications:

Material: Made from cast iron (Grauguss).
Types: Includes Ausf. Type 1, Type 2, Type 3, and Type VB for plain boring.
Dimensions: Detailed dimensions for each part number, including bore diameters and number of ribs.

Procedures:

Bore Diameters: Specified on pages 3-4.
Technical Changes: May occur without notice.

Standards and Recommendations:

Further Sizes: Available upon request.
Technical Changes: Manufacturer reserves the right to make changes.

Key Data from Tables:

Part Numbers: Associated with specific dimensions and types.
Rib Count: Varies across models, affecting application.
Taper Bushes: Compatibility specified with bore ranges.

Critical Information:

Material: All pulleys made from cast iron for durability.
Customization: Custom sizes and specifications available upon request.

Clamping Plates Overview: Detailed list of clamping plates for timing belts, focusing on specifications and dimensions.

Specifications: Made of aluminum, available in various sizes and configurations. Key specifications include pitch, belt width, material, dimensions, and weight.

Product Categories: Categorized by series such as CP-XL, CP-L, CP-H, CP-5M, CP-8M, CP-14M, each with specific dimensions and weight characteristics.

Ordering Information: Further sizes available upon request. Prices listed are not for resale, and freight charges are the customer's responsibility. Previous price lists are superseded.

Legal and Contact Information: Includes a disclaimer about liability and delivery, referring to the company's general conditions of sale. Contact information for Gliewe GmbH is provided.

Catalog excerpts

Sortimentsliste/Product Range Metall Metal

Open the catalog to page 1

Taperbuchsen mit metrischer Bohrung, Nut nach DIN 6885 Teil 1 Taper bushes with metric bores. Keyways to DIN 6885 part 1 Taperbuchse Taper bush Ab 3525: Zylinderkopfschraube mit Innensechskant From 3525: Hexagon head screw .A Diese Bohrung ist mit Flachnut ausgefuhrt. These bores have shallow keyways. Abmessungen der Keilnuten (UNI 6604 DIN 6885) mit Standardbohrung, metrische Reihe Dimensions of keyways (UNI 6604 DIN 6885) with standard bore, metric series Over 10 to Over 12 to Over 17 to Over 22 to Over 30 to Over 38 Over 44 Over 50 Over 58 Over 65 Over 75 Over 85 Over 95 Over 110

Open the catalog to page 3

Taperbuchsen mit Zoll-Bohrung, Nut nach Britischem Standard BS 46 Teil 1Taper bushes with inch bores. Keyways to BS 46 Part 1 Taperbuchse Taper bush (Zoll inch) Innensechs-kantschrauben Hexagon socket screws (Zoll inch) Stuck each auf Anfrage /on request Flachnute fur Taperbuchsen Shallow keyways for taper bushes Bohrungsdurchmesser Bore diameter d2 (mm) Bohrungsdurchmesser Bore diameter d2 (mm) Ab 3525: Zylinderkopfschraube mit Innensechskant From 3525: Hexagon head screw .A Diese Bohrung ist mit Flachnut ausgefuhrt. These bores have shallow keyways.

Open the catalog to page 4

V-grooved pulleys, types - balancing, surcharges for finished bores Fertigungstechnische Anderungen der Ausfuhrungen vorbehalten. We reserve the right to make technical changes. Die Listenpreise gelten fur in einer Ebene nach DIN/ISO 1940 ausgewuchtete GG-Scheiben wie folgt: Die Auswuchtung wird ohne Nut auf glattem Wuchtdorn vorgenommen. Fur Maschinen, deren Laufer mit einer in das Wellenende eingesetzten vollen Pass-feder ausgewuchtet sind, muss mit folgendem Vermerk bestellt werden: »Aus-gewuchtet mit Fertigbohrung und leerer Nut auf glattem Wuchtdorn ohne eingesetzte Passfeder«. Ein Auswuchten...

Open the catalog to page 5

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPZ/10 Richt- .& nurfur Profil 10 only for section 10 Anzahl der Rillen No. of grooves z Taperbuchse Taper bush bu = bundig / precise ru = Rucksprung / behind v = Vorsprung / in front • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley 1) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameter of taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4. Bore diameters d2 see page 3-4.

Open the catalog to page 6

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPZ/10 Richt- Taperbuchse Taper bush • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley [) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameter of taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4.

Open the catalog to page 7

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPA/13 Richt- Taperbuchse Taper bush bu = bundig/ precise ru = Rucksprung / behind v = Vorsprung / in front • Vollscheibe Solid pulley • Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley 1) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameterof taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4. Bore diameters d2 see page 3-4.

Open the catalog to page 8

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPA/13 Richt- Taperbuchse Taper bush • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley [) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameter of taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4. Bore diameters d2 see page 3-4.

Open the catalog to page 9

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPB/17 Richt- .& nur fur Profil 17 only for section 17 Taperbuchse Taper bush • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley [) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameter of taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4. Bore diameters d2 see page 3-4.

Open the catalog to page 10

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPB/17 Richt- Taperbuchse Taper bush • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley 1) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameterof taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4. Bore diameters d2 see page 3-4.

Open the catalog to page 11

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPB/17 Richt- Taperbuchse Taper bush • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley 1) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameter of taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4. Bore diameters d2 see page 3-4.

Open the catalog to page 12

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPC/22 Richt- € Richt- Gewicht Nabe/Hub € Stuck durch- Anzahl ohne Laae t Stuck ohne messer der Ausfuh- Buchse zum TaChSe ohne Buchse Datum Rillen rung Weight Lange K Buchse each diameter No. of Type without hngth Kranz lua>eS each without dd grooves bush ^ Position bush without .& nur fur Profil 22W only for section 22 Anzahl der Rillen No. of grooves z Taperbuchse Taper bush bu = bundig / precise ru = Rucksprung / behind v = Vorsprung / in front • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel...

Open the catalog to page 13

V-grooved pulleys for taper bushes -grooves to ISO/BS/DINProfil Section SPC/22 Richt- bu = bundig / precise ru = Rucksprung / behind v = Vorsprung / in front Anzahl der Rillen No. of grooves z Taperbuchse Taper bush • Vollscheibe Solid pulley O Bodenscheibe Plate pulley (mit oder ohne Spiegel with or without holes) X Armscheibe Spoked pulley 1) Nebenbezugkante: Kleiner 0 der Kegelbohrung. Hub reference edge: small diameter of taper bore. Material: EN-GJL 200 - DIN EN 1561 Bohrungsdurchmesser d2 siehe Seite 3-4. Bore diameters d2 see page 3-4.

Open the catalog to page 14

Metal

Metal

Catalog excerpts

All Gliewe GmbH catalogs and technical brochures