*mydirectindustry

THESI 310

Product catalog summary

THESI 310 Position Controller Overview
The THESI 310 is a versatile position controller capable of managing axis shifting and positioning in three modes: Manual, Semi-Automatic, and Automatic. It supports up to 99 programs, each with 20 positions and 99 repetitions per position. The device operates on a power supply range of 90 Vac to 230 Vac or 24 Vac, and features a 16-bit microcontroller with 256K FLASH and 8K RAM memory.

Mechanical and Electrical Characteristics

Display: 6 high-efficiency digits for position, 2+2 digits for cycles/programs.
Signal Input: Two square waves with 90° phase displacement.
Encoder Power Supply: 5 Vdc or 12 Vdc.
Axis Input Frequency: Up to 20 kHz.
Linear Resolution: Ranges from 200 µm to 1 µm.
Power Supply: 90 Vac to 230 Vac or 24 Vac, with a maximum power consumption of 10 W.
Protection Class: IP 65 for the keyboard, IP 40 for the rear panel.
Operating Temperature: 0 °C to 50 °C; Storage Temperature: -20 °C to 70 °C.
Weight: 650 g.

Connections and Inputs

Power Input: AC voltage power supply options include 220 Vac, 110 Vac, and 24 Vac.
Encoder Inputs: Channels A, B, and Z for zero reference.
Control Inputs: Include START, STOP, DEVIATION, and INCREASE CYCLE.
Output Contacts: Include OK POSITION and MOVEMENT ENABLE.

Installation and Safety Instructions

Installation must be performed by specialized personnel.
Use a mains power supply with an input filter and fuses.
Ensure compliance with the 2006/42/EC Directive before installation.
Do not use in environments with flammable gases or explosives.
Cleaning should be done with a moist cloth after disconnecting the power supply.

Ordering Information
The ordering code specifies the model, outputs, and encoder power supply, e.g., THESI 310 DI 05V for a digital output with a 5 V encoder power supply.

Catalog excerpts

Via Assunta, 57 - 20834 Nova Milanese (MB) - ITALY Tel. +39 0362 366126 Fax +39 0362 366876 www.givimisure.it [email protected] TECHNICAL DATASHEET THESI 310 POSITION CONTROLLER GENERAL FEATURES • THESI 310 position controller can control axis shifting and positioning in 3 different operating modes: - MANUAL, by keyboard; - SEMI-AUTOMATIC, by keyboard; - AUTOMATIC, on the basis of a memorized program. • Possibility of storing up to 99 PROGRAMS with 20 positions each. Up to 99 repetitions can be matched to each position (the program cycle is composed by the position and its respective repetitions). • 90 Vac to 230 Vac power supply, or 24 Vac power supply with selector. • Manufactured with 16 bit microcontroller, 256K FLASH and 8K RAM memory, in single-chip mode. • 5 Vdc or 12 Vdc encoder input. • Optoisolated inputs. START, STOP, INCREASE CYCLE, DEVIATION, PRESET. • Voltage-free contact outputs. OK POSITION, ENABLING WITH CONTROL INTERLOCK FEED / BACK, SLOW / FAST. • ± 10 Vdc analog output. FEED / BACK, SLOW / FAST, with linear ramp. • Possibility of installation on bench or built in. MECHANICAL AND ELECTRICAL CHARACTERISTICS Model POSITION = 6 high-efficiency digits h = 13 mm and negative sign CYCLES / PROGRAMS = 2+2 high-efficiency digits h = 9 mm Signal input 2 square waves with phase displacement of 90° ± 10° electrical and zero reference Encoder power supply Axis input frequency Linear resolution permanent for configurations and programs Power supply Current consumption Digital outputs N.O. relay contacts: 240 VacMAX - 1 AMAX - 120 VAMAX Analog output by removable terminal block front panel: 144x72 mm - depth: 126 mm Operating temperature Storage temperature 60 VdcMAX - 2 AMAX - 60 WMAX * * When using the maximum current, the maximum voltage of the relay contacts is precluded. ORDERING CODE MODEL ENCODER POWER SUPPLY = relay (digital) = analog POSITION CONTROLLER THESI 310 DI 05V Pag. 1/2 GIVI MISURE S.R.L. A SOCIO UNICO C.F. e Iscrizione al Reg. Imprese di Monza e Brianza n° 04355540156 - Cap. Soc. € 51.480,00 I.V.

Open the catalog to page 1

Via Assunta, 57 - 20834 Nova Milanese (MB) - ITALY Tel. +39 0362 366126 Fax +39 0362 366876 www.givimisure.it [email protected] TECHNICAL DATASHEET CONNECTIONS LEGEND POWER INPUT FUSE GROUND TERMINAL SWITCH COM FB / 0V SLOW FAST FEED BACK N.O. RELAY CONTACTS 240 VacMAX - 1 AMAX - 120 VAMAX 60 VdcMAX - 2 AMAX - 60 WMAX V+ VA B Z COM+ COMPRESET START STOP DEV INC.C EN. MOV. OK POS. COM FS / AV = AC voltage power supply (220 Vac, 110 Vac, 24 Vac) = External fuses = Protection ground = AC voltage power supply selector 110/220 Vac or 24 Vac = Encoder power supply output (5 V or 12 V) = Encoder power...

Open the catalog to page 2

All GIVI MISURE catalogs and technical brochures

Archived catalogs

MTT-MTB
2 Pages
VI900
2 Pages
GVS 204
6 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list